AEG BCK556220M 사용자 설명서 - 페이지 4

{카테고리_이름} AEG BCK556220M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG BCK556220M 44 페이지.
AEG BCK556220M에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지), 사용자 설명서 (48 페이지)

AEG BCK556220M 사용자 설명서
4
www.aeg.com
Service Centre or similarly qualified persons to avoid
an electrical hazard.
The means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules.
WARNING: Ensure that the appliance is switched off
before replacing the lamp to avoid the possibility of
electric shock.
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements.
Always use oven gloves to remove or put in
accessories or ovenware.
Use only the food sensor (core temperature sensor)
recommended for this appliance.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can
scratch the surface, which may result in shattering of
the glass.

2. SAFETY INSTRUCTIONS

2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
• Keep the minimum distance from
other appliances and units.
• Before mounting the appliance, check
if the oven door opens without
restraint.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
• The built-in unit must meet the
stability requirements of DIN 68930.
Cabinet minimum
height (Cabinet under
the worktop minimum
height)
600 (600) mm