AEG BCK742220M 사용자 설명서 - 페이지 15
{카테고리_이름} AEG BCK742220M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG BCK742220M 44 페이지.
AEG BCK742220M에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지)
페이지 인쇄
8.2 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press
When you use the function:
Manual, the appliance uses
the automatic settings. You
can change them as with
other functions.
8.3 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Food sensor
The food sensor measures temperature
inside the food. When the food is at the
set temperature, the appliance
deactivates.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the food sensor
supplied and the original
replacement parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Food sensor cannot be used for liquid
dishes.
to confirm.
to confirm.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select the function: Weight
Automatic. Press
5. Touch
or
weight. Press
The automatic programme starts.
6. You can change the weight at any
time. Press
or
weight.
7. When the time ends, an acoustic
signal sounds. Press any symbol to
deactivate the signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.
• During cooking the food sensor must
remain in the dish and the plug in the
socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
The appliance calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set
oven function and
temperature.
Food categories: meat, poultry
and fish
1. Activate the appliance.
2. Insert the tip of the food sensor into
the centre of meat or fish, in the
thickest part if possible. Make sure
that at least 3/4 of the food sensor is
inside of the dish.
3. Put the plug of the food sensor into
the socket located in the front frame
of the appliance.
ENGLISH
15
to confirm.
to set the food
to confirm.
to change the