AEG BE5003001 사용자 설명서 - 페이지 4

{카테고리_이름} AEG BE5003001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG BE5003001 32 페이지. Aeg oven
AEG BE5003001에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지), 사용자 설명서 (32 페이지)

페이지 인쇄

www.aeg.com

scratch the surface, which may result in shattering of

the glass.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must in-

stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the han-

dle.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is instal-

led below and adjacent safe struc-

tures.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply. If not, contact an

electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Contact the Service or an electrician to

change a damaged mains cable.

• Do not let mains cables to come in

touch with the appliance door, spe-

cially when the door is hot.

• The shock protection of live and insu-

lated parts must be fastened in such a

way that it cannot be removed without

tools.

• Connect the mains plug to the mains

socket only at the end of the installa-

tion. Make sure that there is access to

the mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you discon-

nect the appliance from the mains at

all poles. The isolation device must

have a contact opening width of mini-

mum 3 mm.

2.2 Use

WARNING!

Risk of injury, burns or electric

shock or explosion.