AEG BE5304001 사용자 설명서 - 페이지 12

{카테고리_이름} AEG BE5304001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG BE5304001 36 페이지. Built-in oven
AEG BE5304001에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지), 사용자 설명서 (36 페이지)

페이지 인쇄

Using the Accesories

There are two temperatures to be set:

• the oven temperature: refer to the table for roasting;

• the core temperature: refer to the table for core temperature sensor;

Only use the food sensor supplied or genuine replacement parts.

1. Activate the appliance.

2. Put the point of the core temperature

sensor (with the symbol

dle) into the centre of the meat.

3. Put the core temperature sensor plug in

the socket on the front of the appliance.

The display shows food sensor symbol and

default core temperature. When you use

the core temperature sensor for the first

time, the display shows 60°C as the de-

fault core temperature.

If you change the core temperature the new

value will be saved and displayed during next

use of the core temperature sensor.

4. Press

flashes.

5. Press

or the settings save automatically after 10 seconds.

6. Set the oven function and, if necessary, the oven temperature.

The display shows current core temperature sensor temperature and (which shows

the relation between current core temperature and set core temperature).

The core temperature sensor must stay in the meat and in the food sensor socket during

the cooking process.

When the appliance calculates the provisional duration time for the first time, the Timer/

Residual heat display shows "-" that changes position. When the first calculation ends, the

Timer/Residual heat display shows the duration of the cooking process. Calculations are

running in the background during the cooking process. Display is updated from time to

time with new duration value.

7. When the meat is at the set core temperature, the symbol for the core temperature

and core temperature sensor flash. An acoustic signal operates for two minutes.

Press any button to stop an acoustic signal (except ON/OFF).

8. Remove the core temperature sensor plug from the socket . Remove the meat from the

appliance.

9. Deactivate the appliance.

Every time you put the core temperature sensor in the socket, you need to set the duration

and end time again.

on the han-

to set core temperature.