AEG BEB351010B 사용자 설명서 - 페이지 33
{카테고리_이름} AEG BEB351010B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG BEB351010B 36 페이지.
AEG BEB351010B에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지)
페이지 인쇄
11.7 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1
Step 2
Step 3
Step 4
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table
please contact with an Authorised
Service Centre.
Problem
The oven does not
heat up.
The display shows
"12.00".
The water leaks out
of the cavity em-
bossment.
Before you replace the lamp:
Step 1
Turn the glass cover to remove it.
Clean the glass cover.
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Install the glass cover.
Check if...
The fuse is blown.
There was a power
cut. Set the time of
day.
There is too much
water in the cavity
embossment.
Step 2
Disconnect the oven from
the mains.
Problem
Unsatisfying cook-
ing performance of
the function: True
Fan Cooking PLUS .
The lamp does not
work.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity. Do
not remove the rating plate from the
oven cavity.
ENGLISH
Step 3
Put a cloth on the bottom of
the cavity.
Check if...
You filled the cavity
embossment with
water.
The lamp is burnt
out.
33