AEG BEB351010B 사용자 설명서 - 페이지 27

{카테고리_이름} AEG BEB351010B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG BEB351010B 32 페이지.
AEG BEB351010B에 대해서도 마찬가지입니다: 사용자 설명서 (36 페이지)

페이지 인쇄

10.3 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

Install the shelf supports in the opposite

sequence.

10.4 Aqua cleaning

The Aqua cleaning procedure uses

humidity to help remove remaining fat

and food particles from the oven.

1. Put 200 ml of water into the cavity

embossment at the bottom of the

oven.

2. Set the True Fan Cooking PLUS

function

and press the Plus

Steam button

3. Set the temperature to 90 °C.

4. Let the appliance operate for 30

minutes.

5. Deactivate the appliance and let it

cool down.

6. When the appliance is cool, clean the

inner surfaces of the oven with a

cloth.

WARNING!

Make sure that the

appliance is cool before

you touch it. There is a

risk of burns.

10.5 Oven ceiling

WARNING!

Deactivate the appliance

before you remove the

heating element. Make sure

that the appliance is cold.

There is a risk of burns.

Remove the shelf supports.

You can fold down the heating element

on the oven ceiling to clean the oven

ceiling easily.

1. Hold the heating element with two

hands at the front.

2. Pull it forwards against the spring

pressure and out of two holders.

The heating element folds down.

3. Clean the oven ceiling.

4. Install the heating element in the

opposite sequence.

Install the heating element

correctly above the supports

on the inner walls of the

appliance.

5. Install the shelf supports.

10.6 Removing and installing

the door

You can remove the door and the

internal glass panels to clean it. The

number of glass panels is different for

different models.

WARNING!

Be careful when you remove

the door from the appliance.

The door is heavy.

1. Open the door fully.

ENGLISH