Alinco 435T 사용자 설명서

{카테고리_이름} Alinco 435T에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alinco 435T 6 페이지. Vhf/uhf radios

Programming Alinco -135T, 235T, and 435T VHF/UHF Radios

RADIO DISPLAYS and CONTROLS: The front panel of the radio is shown in Figure 1.

Figure 1

Turning The Radio On: The power switch is the pushbutton in the upper right hand corner of

the radio.

Volume Control: The Volume Control is the small knob to the left of the Power On

Pushbutton.

Tuning Knob: The Tuning Knob is the large knob below the Volume Control and Power On

Pushbutton.

Function Keys: There are 6 function keys located below the display. The keys are labeled as

follows:

SET

SHIFT

LOCK

M/L

FUNC

V/W

MHz

TS/DCS

CALL

SQL

The functions engraved on the keys (the lower set of functions shown above) are performed by

directly pushing the appropriate keys. The functions labeled above the keys (the upper set of

functions) are second level functions. These functions are performed by first pushing the

Function (FUNC) key followed by the key under the desired function label.

End Function Selection: Usually, the radio will return you to the normal display after selecting

a function. Occasionally you can get stuck in the function selection process. It is therefore