AEG BES356010B 사용자 설명서 - 페이지 12
{카테고리_이름} AEG BES356010B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG BES356010B 36 페이지.
AEG BES356010B에 대해서도 마찬가지입니다: 사용자 설명서 (36 페이지)
페이지 인쇄
12
www.aeg.com
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the oven
turns off.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and
the plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
Food categories: meat, poultry
and fish
1. Insert the tip of the core temperature
sensor into the centre of meat or fish,
in the thickest part if possible. Make
sure that at least 3/4 of the core
temperature sensor is inside of the
dish.
2. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
The indicator for the core temperature
sensor
flashes.
3. Press the button
core temperature. You can set the
temperature from 30 °C to 99 °C.
4. Set the oven function and
temperature.
When the dish is at the set core
temperature, an acoustic signal sounds
for 2 minutes. Press any button to stop
the signal.
5. Deactivate the appliance.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the dish from the appliance.
If the dish is not cooked to your
satisfaction, do the above steps again
and set a higher core temperature.
You can change the temperature at any
time during the cooking. Press
change the set core temperature.
or
to set the
to