Alinco DJ-196 사용 설명서 - 페이지 16

{카테고리_이름} Alinco DJ-196에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alinco DJ-196 18 페이지. Vhf/uhf fm transceiver
Alinco DJ-196에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

Here is the explanation of each function.

[No.1] Battery Save Function ON/OFF

1. [BS-ON] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then ON and OFF are

switched repeatedly.

..downward

upward.....

......BS-ON → BS-OF ..........

........................................

[No.2] Scan Type Selection

1. [TIMER] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. The scan types are

switched repeatedly.

.downward

upward.....

.....TIMER .....BUSY .....

................................

[No.3] Beep Tone ON/OFF

1. [BEP-ON] appears on the LCD.

2. Rotate the dial to set to [BEP-OF].

3. Each time the dial is rotated, ON and OFF are switched repeatedly.

[No.4] Tone Burst Frequency Setting

1. [1750] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then the tone burst

frequency will be changed.

...... Downward

......... 1750....... 2100...... 1000..... 1450......

.........................................................

[No.5] Clock Shift Setting

1. [SFT-OF] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then the setting of the

CLOCK will be changed.

..... Downward...... Upward.......

.........SFT-OF... SFT-ON...........

...........................................

[No.6] Busy Channel Lock Out Setting

1. [BCL-OF] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then the setting of the

BCLO will be changed.

...... Downward......Upward ..........

..........BCL-OF......BCL-ON..........

................................................

[No.7] TOT Penalty Time

1. [TP-OFF] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. The setting of TOT

penalty will be changed.

3. ** shows the current TOT penalty time.

The initial setting is 0 second. [TP-OFF] appears on the LCD.

4. Rotate the dial to change the TOT penalty time.

Upward......