A+V Link Technologies PowerHDLink AVM-6985H-SYS-A1 빠른 설정 매뉴얼 - 페이지 4
{카테고리_이름} A+V Link Technologies PowerHDLink AVM-6985H-SYS-A1에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A+V Link Technologies PowerHDLink AVM-6985H-SYS-A1 8 페이지.
페이지 인쇄A+V Link Technologies
Step 2: Connect the HDTV set to the Receiver
Connect your PowerHDLink receiver to the HDTV. The receiver is capable of using HDMI, YPbPr
and CVBS cables. You must choose from one of the following options.
a) HDMI cable - The figure shows an HDMI
connection to the Rx. Attach the other end to
your HDTV.
c) CVBS cable - Connect the CVBS and Audio
connectors to the 3 connectors below the
YPbPr connectors
Step 3: Power on TV set and Blu-Ray Disc player
Power on your TV set and Blu-Ray Player in any order. Place a Blu-Ray video disc into the player.
Step 4: Connect the power cables to the Tx and Rx
Connect one end of the Tx power cable to the Transmitter.
Connect one end of the Rx power cable to the Receiver.
Step 5: Connect the Power Cords to Power outlets
Connect the other end of the Tx power cable to an outlet with the
appropriate voltage. Connect the other end of the Rx power cable
to an outlet.
©2009-2011 Copyright by A+V Link Technologies, Corp.
PowerHDLink Quick Setup Guide
b) YPbPr cables - Connect the YPbPr cables in
the same way as the Player-Tx connections,
matching the colors between the connectors
and adapters.
Note: The connections you use between Player-
Tx and between HDTV-Rx do not have to
be the same. In other words, if you are
using an HDMI cable between Player-Tx,
you can use YPbPr or CVBS between
HDTV-Rx.
4
Version 2.2