Garmin TREAD 010-02406-00 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Garmin TREAD 010-02406-00에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin TREAD 010-02406-00 38 페이지.

페이지 인쇄
Garmin TREAD 010-02406-00 소유자 매뉴얼
2
Find a suitable location for the antenna.
3
Using a flat-head screwdriver or
loosen the bolt
on the external antenna mount until the
ring separates.
4
Place the mount around the roll bar.
5
Tighten the bolt on the mount until the ring is secure.
6
Screw down and tighten the antenna
antenna mount plate.
7
Route the antenna cable along a suitable path in your vehicle
and secure it using the included zip ties.

Installing the Antenna on the Group Ride Mount

NOTE: the mounted antenna must be at least 4 cm (1.57 in.)
away from the nearest roll bar or metal surface to avoid radio
interference.
For the best range performance, use the external antenna
mount. You can mount the antenna directly onto the Group Ride
mount when it is not possible to use the external antenna mount
(Mounting the Antenna, page
Screw down and tighten the antenna onto the Group Ride
mount.
Installation
5
/
-in. (8-mm) nut driver,
16
onto the external
2).

Installing the Fist Microphone and Mount

Before you can attach the fist microphone mount to your
dashboard, you must select a suitable location on the
dashboard.
It is your responsibility to ensure the mounting location complies
with all applicable laws and ordinances, and does not block your
view of the road during the safe operation of your vehicle.
Avoid wires, gauges, air bags, air bag covers, heating,
ventilation, and air conditioning and other items when drilling
pilot holes and attaching the mount to the vehicle. Garmin is not
responsible for any damages or consequences arising from the
installation.
NOTE: this feature is not available on all product models.
1
Align and insert the connector on the fist microphone onto the
Group Ride mount.
2
Tighten the collar around the connected cable.
3
Place the mount
on the selected location.
4
Using the mount as a template, mark the three screw
locations.
5
Drill pilot holes (optional).
WARNING
NOTICE
3