Garmin USB Data Card Programmer 사용자 설명서 - 페이지 7

{카테고리_이름} Garmin USB Data Card Programmer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin USB Data Card Programmer 12 페이지. Garmin usb data card programmer gps-accessory: users manual
Garmin USB Data Card Programmer에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄

Introduction

Installation of the USB Data Card Programmer and

Device Drivers

1. Connect the USB connector on the end of the Programmer cable to

the USB port on the back of the computer. Most computers have two

USB Ports. Either port will work. The computer does not need to be

turned off when connecting or dsconnecting the Programmer.

Use care to insert the USB connector correctly. Do not force the

connection as this may damage the USB port on your

computer or the USB connector on the Programmer.

After connecting the Programmer to your computer you must install

the device drivers from the CD-ROM provided with the Programmer.

2. Insert the Programmer CD-ROM into your computer's CD-ROM

drive.

3. The computer will recognize the Programmer as a USB device and

open the Add New Hardware Wizard and search for the device drivers.

Click on "Next". If, for some reason, the Wizard does not run

automatically, click the Start button and select "Settings" and then

"Control Panel". Double click on the "Add New Hardware" icon.

4. The next screen will ask you if you want it to search for the best

driver for your device or if you want to display a list to choose

from. Select "Search for the best driver for your device" and click

on "Next".

Installation

Connecting the Programmer to

Your Computer

USB Connector

USB Port

USB (Universal Serial Bus) Port

and USB Connector

Installing the Device Drivers

Programmer Cable