ALISEO 020758 설치 및 작동 지침 - 페이지 9

{카테고리_이름} ALISEO 020758에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ALISEO 020758 12 페이지. Magnifying mirror with ledtechnology

Changing Arm Direction

Metal plate

Blocker

Mounting Instructions

1. Loosen the 2 screws at the wall bracket and

remove the mounting plate.

If the swing arm direction has to be changed

go to point 2. If the swing arm direction is

correct then continue to point 4.

2. To reverse the swing arm: Loosen the screw

and remove the blocker and metal plate.

3. Re-position the swing arm and secure the

metal plate and the blocker on the opposite

side.

4. Drill three holes on the wall, and then fixed

the mounting plate onto the wall with the

provided screws, anchor bolts and silicone

washers.

5. At the terminal block connect and secure the

wires from the mirror and the wires from the

wall.

6. Place the wall bracket over the mounting

plate and press into place. Proceed to secure

the wall bracket to the mounting plate via

the 2 screws.

After installation, please check to ensure that

the joints of the arm are well-secured. The

joints can be adjusted by a screwdriver.