Garmin zumo 590LM 소유자 매뉴얼 - 페이지 13
{카테고리_이름} Garmin zumo 590LM에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin zumo 590LM 26 페이지. Premium motorcycle navigator
Garmin zumo 590LM에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (36 페이지), 사용자 설명서 (32 페이지)
페이지 인쇄
Viewing the Trip Information Page
The trip information page displays your present speed and
provides statistics about your trip.
NOTE: If you make frequent stops, leave the device turned on,
so it can accurately measure elapsed time during the trip.
From the map, select Speed.
Resetting Trip Information
1
From the map, select Speed .
2
Select
> Reset Field(s).
3
Select an option:
• When not navigating a route, select Select All to reset
every data field except the speedometer, on the first
page.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing Current Location Information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select the vehicle.
Finding Nearby Services
You can use the Where Am I? page to find nearby services,
such as fuel, hospitals or police stations.
1
From the map, select the vehicle.
2
Select a category.
Getting Directions to Your Current Location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
1
From the map, select the vehicle.
2
Select
> Directions to Me.
3
Select a starting location.
4
Select Select.
Hands-Free Features
You can connect your device to a wireless headset and listen to
navigation voice prompts through the headset. While connected
to a headset, you can connect to a mobile phone to make and
receive calls using the device and your headset.
Enabling Bluetooth Wireless Technology
1
Select Settings > Bluetooth.
2
Select Bluetooth.
About Wireless Headsets
Using wireless technology, your device can send audio
navigation prompts to a wireless headset. For more information,
go to http://www.garmin.com/bluetooth.
Hands-Free Features
Pairing a Wireless Headset
NOTE: Only one headset can receive navigation prompts and
phone calls at a time. Up to two headsets can be used for
multimedia audio.
Before you can receive navigation prompts through your
headset, you must pair your device with a compatible mobile
headset.
1
Place your headset and your Bluetooth device within 33 ft.
(10 m) of each other.
2
On your device, enable Bluetooth wireless technology.
3
On your headset, enable Bluetooth wireless technology and
make it visible to other Bluetooth devices.
4
Select Settings > Bluetooth.
5
Follow the on-screen instructions.
Your device sends navigation prompts to your headset as you
navigate a route.
About Hands-Free Calling
NOTE: While most phones and headsets are supported and
can be used, it cannot be guaranteed that a particular phone or
headset can be used. All features may not be available for your
phone.
Using Bluetooth wireless technology, your device can connect
to your mobile phone and wireless headset or helmet to become
a hands-free device. To determine whether your device with
Bluetooth technology is compatible with your device, go to
www.garmin.com/bluetooth.
Pairing Your Phone
1
Place your phone and your zūmo device within 33 ft. (10 m)
of each other.
2
On your phone, enable Bluetooth wireless technology, and
set the phone to be discoverable.
3
On your zūmo device, select Settings > Bluetooth.
4
Follow the on-screen instructions on your phone and your
zūmo device.
Placing a Call
Dialing a Number
1
Select Apps > Phone > Dial.
2
Enter the number.
3
Select Dial.
Calling a Contact in Your Phone Book
Your phone book is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the phone book to be available. Some phones do
not support this feature.
1
Select Apps > Phone > Phone Book.
2
Select a contact.
3
Select Call.
Calling a Location
1
Select Apps > Phone > Browse Categories.
2
Select a point of interest.
3
Select Call.
Receiving a Call
When you receive a call, select Answer or Ignore.
Using the Call History
Your call history is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the call history to be available. Some phones do not
support this feature.
1
Select Apps > Phone > Call History.
9