Garmin Zumo XT 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Garmin Zumo XT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Zumo XT 49 페이지.
Garmin Zumo XT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (46 페이지)

페이지 인쇄
Garmin Zumo XT 소유자 매뉴얼

Getting Started

See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
1
Connect to a Wi‑Fi
®
network
page
19)(optional).
2
Pair your Bluetooth
®
phone and headset
and Headset, page
13) (optional).
3
Update the maps and software on your device
Updates, page
20).
4
Acquire GPS signals
(Acquiring GPS Signals, page
5
Mount the device and connect it to power.
6
Adjust the screen brightness
Brightness, page
1).
7
Navigate to your destination

Device Overview

Power button
microSD
memory card slot
®
USB power and data port

Turning the Device On or Off

• To turn the device on, press the power button, or connect the
device to power.
• To put the device in power saving mode, press the power
button while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power button until
a prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the
power button before the prompt appears, the device enters
power saving mode.

Acquiring GPS Signals

When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Wait while the device locates satellites.
3
If necessary, go to an open area, away from tall buildings and
trees.
Getting Started
WARNING
‑ Fi Network,
(Connecting to a Wi
(Pairing Your Phone
(Product
1).
(Adjusting the Screen
(Starting a Route, page
in the status bar indicates the satellite signal strength. When
at least half the bars are filled, the device is ready for navigation.

Status Bar Icons

The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information
Bluetooth technology status. Select to view the Bluetooth
settings
Wi-fi signal strength. Select to change the wi-fi settings
Settings, page
Connected to hands-free calling. Select to place a phone call
(Hands-Free Calling, page
Active usage mode. Select to change the usage mode.
Current time. Select to set the time
5).
page
19).
Battery charge level.
Garmin Drive
Headset, page
Temperature. Select to view the weather forecast
Weather Forecast, page
Fuel status. Select to view fuel tracking information
Tracking, page

Using the On-Screen Buttons

On-screen buttons allow you to navigate the pages, menus, and
menu options on your device.
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select
or
• Hold
or
• Select
to see a context-based menu of options for the
current screen.

Adjusting the Volume

1
Select Volume.
2
Select an option:
• Use the slider bar to adjust the volume.
• Select
• Select a check box to enable or disable additional sound
options.

Using the Audio Mixer

You can use the audio mixer to set the volume levels for
different audio types, such as navigation prompts or phone calls.
The level for each audio type is a percentage of the master
volume.
1
Select Volume.
2
Select Mixer.
3
Use the sliders to adjust the volume for each audio type.

Adjusting the Screen Brightness

1
Select Settings > Display > Brightness.
2
Use the slider bar to adjust the brightness.

Transportation Modes

Routing and navigation are calculated differently based on your
transportation mode. The current transportation mode is
indicated by an icon in the status bar.
(Viewing GPS Signal Status, page
(Bluetooth Settings, page
18).
18).
14).
(Setting the Time,
™
app connection status
(Pairing Your Phone and
13).
17).
8).
to scroll through lists or menus.
to scroll faster.
to mute the device.
23).
‑ Fi
(Wi
(Viewing the
(Fuel
1