Garmin D2 AIR X10 소유자 매뉴얼 - 페이지 27
{카테고리_이름} Garmin D2 AIR X10에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin D2 AIR X10 48 페이지.
페이지 인쇄
6 If necessary, press
round or rest.
7 After you finish the activity, press
activity timer.
8 Select
.
Calibrating the Treadmill Distance
To record more accurate distances for your treadmill runs,
you can calibrate the treadmill distance after you run at
least 1.5 km (1 mi.) on a treadmill. If you use different
treadmills, you can manually calibrate the treadmill
distance on each treadmill or after each run.
1 Start a treadmill activity
2 Run on the treadmill until your D2 Air X10 watch
records at least 1.5 km (1 mi.).
3 After you complete your run, press
4 Check the treadmill display for the distance traveled.
5 Select an option:
• To calibrate the first time, enter the treadmill
distance on your watch.
• To manually calibrate after the first-time calibration,
swipe up, select Calibrate & Save, and enter the
treadmill distance on your watch.
Outdoor Activities
The D2 Air X10 watch comes preloaded with apps for
outdoor activities, such as running and biking. GPS is
turned on for outdoor activities. You can add apps using
default activities, such as cardio or rowing.
Going for a Run
Before you can use a wireless sensor for your run, you
must pair the sensor with your watch
Wireless Sensors, page
32).
1 Put on your wireless sensors, such as a heart rate
monitor (optional).
2 Press
.
3 Select Run.
4 When using optional wireless sensors, wait while the
watch connects to the sensors.
5 Go outside, and wait while the watch locates satellites.
6 Press
to start the activity timer.
The watch records activity data only while the activity
timer is running.
7 Start your activity.
8 Press
to record laps (optional)
the Auto Lap Feature, page
9 Swipe up or down to scroll through data screens.
10 After you complete your activity, press
.
Apps and Activities
to manually move to the next
to stop the
(Starting an Activity, page
.
(Pairing Your
(Marking Laps Using
29).
, and select
Going for a Ride
Before you can use a wireless sensor for your ride, you
must pair the sensor with your watch
Wireless Sensors, page
1 Pair your wireless sensors, such as a heart rate
monitor, speed sensor, or cadence sensor (optional).
2 Press
.
3 Select Bike.
4 When using optional wireless sensors, wait while the
watch connects to the sensors.
5 Go outside, and wait while the watch locates satellites.
19).
6 Press
to start the activity timer.
The watch records activity data only while the activity
timer is running.
7 Start your activity.
8 Swipe up or down to scroll through data screens.
9 After you complete your activity, press
.
Viewing Your Ski Runs
Your watch records the details of each downhill skiing or
snowboarding run using the auto run feature. This feature
is turned on by default for downhill skiing and
snowboarding. It automatically records new ski runs
based on your movement. The timer pauses when you
stop moving downhill and when you are on a chairlift. The
timer remains paused during the chairlift ride. You can
start moving downhill to restart the timer. You can view
run details from the paused screen or while the timer is
running.
1 Start a skiing or snowboarding activity.
2 Swipe up or down to view details of your last run, your
current run, and your total runs.
The run screens include time, distance traveled,
maximum speed, average speed, and total descent.
Going for a Pool Swim
1 Press
.
2 Select Pool Swim.
3 Select your pool size, or enter a custom size.
4 Press
to start the activity timer.
5 Start your activity.
The watch automatically records swim intervals and
lengths.
6 Press
when you rest.
The rest screen appears.
7 Press
to restart the interval timer.
8 After you complete your activity, press
activity timer.
.
9 Select an option:
• To save the activity, hold
• To discard the activity, swipe down and press
(Pairing Your
32).
, and select
to stop the
.
.
21