Garmin D2 Bravo 소유자 매뉴얼 - 페이지 25

{카테고리_이름} Garmin D2 Bravo에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin D2 Bravo 36 페이지.
Garmin D2 Bravo에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지)

페이지 인쇄

1. Setting up Garmin Express

Select an activity.

Select Lap Key.

The lap key status changes to On or Off based on the current

setting.

Watch Face Settings

You can customize the appearance of the watch face by

selecting the layout, colors, and additional data. You can also

download custom watch faces from the Connect IQ store.

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you must

install a watch face from the Connect IQ store

Features, page

17).

You can customize the watch face information and appearance,

or activate an installed Connect IQ watch face.

Hold UP.

Select Settings > Watch Face > Type.

Select an option:

• To activate the pre-loaded digital watch face, select

Digital.

• To activate the pre-loaded analog watch face, select

Analog.

• To activate an installed Connect IQ watch face, select the

name of the installed watch face.

If using a pre-loaded watch face, select an option:

• To change the background color, select Background

Color.

• To add or change an accent color for the digital watch

face, select Accent Color.

• To change the style of the digits for the digital watch face,

select Layout.

• To change the style of the hands for the analog watch

face, select Hands.

• To change the style of the numbers for the analog watch

face, select Background.

• To change the data that appears on the watch face, select

Additional Data.

Select UP or DOWN to preview the watch face options.

Select START to save the selection.

Sensors Settings

Compass Settings

Hold UP, and select Settings > Sensors > Compass.

Calibrate: Allows you to manually calibrate the compass sensor

(Calibrating the Compass Manually, page

Display: Sets the directional heading on the compass to letters,

degrees, or milli-radians.

North Ref.: Sets the north reference of the compass

North Reference, page

21).

Mode: Sets the compass to use electronic-sensor data only

(On), a combination of GPS and electronic-sensor data when

moving (Auto), or GPS data only (Off).

Calibrating the Compass Manually

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

Customizing Your Device

(Connect IQ

21).

(Setting the

NOTICE

distances or after extreme temperature changes, you can

manually calibrate the compass.

Hold UP.

Select Settings > Sensors > Compass > Calibrate > Start.

Follow the on-screen instructions.

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Hold UP.

Select Settings > Sensors > Compass > North Ref..

Select an option:

• To set geographic north as the heading reference, select

True.

• To set the magnetic declination for your location

automatically, select Magnetic.

• To set grid north (000º) as the heading reference, select

Grid.

• To set the magnetic variation value manually, select User,

enter the magnetic variance, and select Done.

Altimeter Settings

Hold UP, and select Settings > Sensors > Altimeter.

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Barometer: Allows you to set the barometric pressure manually,

or select a value from the nearest METAR station through

Garmin Connect Mobile.

O2 Alert: Sets an alarm to vibrate when you reach a low-oxygen

altitude.

Sync to Elevation: Allows you to synchronize the device to your

current elevation manually.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation or the correct sea level pressure.

Hold UP.

Select Settings > Sensors > Altimeter.

Select an option:

• To calibrate automatically from your GPS starting point,

select Auto Cal. > On.

• To enter a known altitude, select Calibrate.

Elevation Settings

Hold UP, and select Settings > Sensors > Elevation.

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Calibrate: Allows you to calibrate the altimeter sensor manually.

Navigation Settings

You can customize the map features and appearance when

navigating to a destination.

Customizing Map Features

Hold UP.

Select Settings > Navigation > Data Screens.

Select an option:

• Select Map to turn on or off the map.

• Select Guide to turn on or off the guide screen that

displays the compass bearing or course to follow while

navigating.

• Select a screen to add, remove, or customize.