Garmin D2 Pilot 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Garmin D2 Pilot에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin D2 Pilot 24 페이지.
Garmin D2 Pilot에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (4 페이지), 소유자 매뉴얼 (24 페이지)

페이지 인쇄
Garmin D2 Pilot 소유자 매뉴얼
2
Select Setup > Sensors > Mode > Always On.
Acquiring Satellite Signals and Recording a
Track
Before you can use the GPS navigation features, such as
recording a track, you must acquire satellite signals.
The time and date are set automatically based on the GPS
position.
1
Select the action key.
2
Select Start GPS.
3
Go to an area with a clear view of the sky and remain
stationary while the device acquires satellite signals.
4
Walk around or travel to record a track.
Your distance and time appear.
5
Select
to view the loop of data pages.
6
Hold
.
7
Select an option:
• Select Pause Track to pause tracking.
• Select Save Track to save your track.
• Select Clear Track to erase the track without saving.
• Select Stop GPS to turn off GPS without deleting your
track.

Stopping GPS

1
Select the action key.
2
Select Stop GPS.

Profiles

A profile is a collection of settings that optimizes your device for
a certain activity. For example, the data pages, settings, and
views can appear differently when you use the device in an
airplane than when you use it for hiking.
When you are using a profile and you change settings such as
data fields or units of measurement, the changes are saved
automatically as part of the profile.
To use profiles on your device, you must add the Profiles menu
option to the main menu
(page

Changing Profiles

When you change activities, you can quickly change the setup
of the device to suit the activity by changing the profile.
1
Select the action key.
2
Select Profiles.
3
Select a profile.
The profile you selected is now the active profile. Any changes
you make are saved to the active profile.

Creating a Custom Profile

You can customize your settings and data fields for a particular
activity or trip.
1
Select the action key.
2
Select Setup > Profiles.
3
Select an option:
• Select a profile.
• Select Create New, and select the new profile.
The profile you selected is now the active profile. The
previous profile was saved.
4
If necessary, select Edit, and edit the name of the profile.
5
Customize your settings
active profile.
Any changes you make are saved to the active profile.

Waypoints, Routes, and Tracks

9).
(page
9) and data fields for the

Deleting a Profile

1
Select the action key.
2
Select Setup > Profiles.
3
Select a profile.
4
Select Delete > Yes.
Waypoints, Routes, and Tracks

Waypoints

Waypoints are locations you record and store in the device.

Creating a Waypoint

You can save your current location as a waypoint.
1
Hold the action key.
2
Select an option:
• To save the waypoint without changes, select Save.
• To make changes to the waypoint, select Edit, make
changes to the waypoint, and select Save.

Finding a Waypoint by Name

1
Select the action key.
2
Select Waypoints > Spell Search.
3
Select the action key,
4
Select _ > Done.
5
Select the waypoint.

Finding Nearby Locations

1
Select the action key.
2
Select Waypoints > Search Near.
3
Select an option:
• Select Waypoints to search near a waypoint.
• Select Cities to search near a city.
• Select Current Loc to search near your current location.

Editing a Waypoint

Before you can edit a waypoint, you must create a waypoint.
1
Select the action key.
2
Select Waypoints.
3
Select a waypoint.
4
Select Edit.
5
Select an item to edit, such as the name.
6
Select the action key,
7
Select _ > Done.

Increasing the Accuracy of a Waypoint Location

You can refine a waypoint location for more accuracy. When
averaging, the device takes several readings at the same
location and uses the average value to provide more accuracy.
1
Select the action key.
2
Select Waypoints.
3
Select a waypoint.
4
Select Average.
5
Move to the waypoint location.
6
Select Start.
7
Follow the on-screen instructions.
8
When the confidence reaches 100%, select Save.
For best results, collect four to eight samples for the waypoint,
waiting at least 90 minutes between samples.
, and
to enter characters.
, and
to enter characters.
3