Garmin epix 소유자 매뉴얼 - 페이지 19

{카테고리_이름} Garmin epix에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin epix 28 페이지. Touchscreen gps/glonass mapping watch
Garmin epix에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (23 페이지)

페이지 인쇄

1. Device Overview

Select Climb Screen to identify which data screen appears

while climbing.

If necessary, select Invert Colors to reverse the display

colors when changing modes.

Select Vertical Speed to set the rate of ascent over time.

Select Mode Switch to set how quickly the device changes

modes.

3D Speed and Distance

You can set 3D speed and distance to calculate your speed or

distance using both your elevation change and your horizontal

movement over ground. You can use it during activities such as

skiing, climbing, navigating, hiking, running, or biking.

Using Auto Scroll

You can use the auto scroll feature to cycle through all of the

activity data screens automatically while the timer is running.

Hold

Select Settings > Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select Auto Scroll.

Select a display speed.

UltraTrac

The UltraTrac feature is a GPS setting that records track points

and sensor data less frequently. Enabling the UltraTrac feature

increases battery life but decreases the quality of recorded

activities. You should use the UltraTrac feature for activities that

demand longer battery life and for which frequent sensor data

updates are less important.

Power Save Timeout Settings

The timeout settings affect how long your device stays in

training mode, for example, when you are waiting for a race to

start. Hold

, select Settings > Apps, and select an activity.

Select Power Save to adjust the timeout settings for the activity.

Normal: Sets the device to enter low-power watch mode after 5

minutes of inactivity.

Extended: Sets the device to enter low-power watch mode after

25 minutes of inactivity. The extended mode can result in

shorter battery life between charges.

Watch Face Settings

You can customize the appearance of the watch face by

selecting the layout, colors, and additional data. You can also

download custom watch faces from the Connect IQ store.

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you must

install a watch face from the Connect IQ store

Features).

You can customize the watch face information and appearance,

or activate an installed Connect IQ watch face.

Hold

Select Settings > Watch Face > Type.

Select an option:

• To activate the pre-loaded digital watch face, select

Digital.

• To activate an installed Connect IQ watch face, select the

name of the installed watch face.

If using a pre-loaded watch face, select an option:

• To change the background color, select Background

Color.

• To add or change an accent color for the digital watch

face, select Accent Color.

Customizing Your Device

• To change the style of the digits for the digital watch face,

• To change the data that appears on the watch face, select

Select UP or DOWN to preview the watch face options.

Select START to save the selection.

Customizing the Widget Loop

You can show, hide, or move items in the widget loop.

Hold

Select Settings > Widgets.

Select a widget.

Select an option:

• Select Status to show or hide the widget from the widget

• Select Move Up or Move Down to change the location of

Sensors Settings

Compass Settings

Hold

Calibrate: Allows you to manually calibrate the compass sensor

(Calibrating the

Display: Sets the directional heading on the compass to letters,

degrees, or milli-radians.

North Ref.: Sets the north reference of the compass

North

Mode: Sets the compass to use electronic-sensor data only

(On), a combination of GPS and electronic-sensor data when

moving (Auto), or GPS data only (Off).

Calibrating the Compass

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Hold

Select Settings > Sensors > Compass > Calibrate > Start.

Follow the on-screen instructions.

Setting the North Reference

(Connect IQ

You can set the directional reference used in calculating

heading information.

Hold

Select Settings > Sensors > Compass > North Ref..

Select an option:

• To set geographic north as the heading reference, select

• To set the magnetic declination for your location

• To set grid north (000º) as the heading reference, select

Altimeter and Barometer

The device contains an internal altimeter and barometer. The

device collects altimeter and barometer data continuously, even

in low-power mode. The altimeter displays your approximate

elevation based on pressure changes. The barometer displays

select Layout.

Additional Data.

loop.

the widget in the widget loop.

, and select Settings > Sensors > Compass.

Compass).

Reference).

NOTICE

True.

automatically, select Magnetic.

Grid.

(Setting the