Garmin fenix 2 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Garmin fenix 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin fenix 2 26 페이지. Sports and fitness gps-devices
Garmin fenix 2에 대해서도 마찬가지입니다: 빠른 매뉴얼 (25 페이지), 빠른 시작 매뉴얼 (4 페이지)
페이지 인쇄
3
Orient yourself so that the bearing pointer aligns with the
painted mark on the device.
4
Travel in that direction until you reach your destination.
Map
represents your location on the map. As you travel, the icon
moves and leaves a track log (trail). Waypoint names and
symbols appear on the map. When you are navigating to a
destination, your route is marked with a line on the map.
• Map navigation
(Panning and Zooming the
• Map settings
(Map
Settings)
Panning and Zooming the Map
1
While navigating, select UP to view the map.
2
Hold MENU.
3
Select Pan/Zoom.
4
Select an option:
• To toggle between panning up and down, panning left and
right, or zooming, select START.
• To pan or zoom the map, select UP and DOWN.
• To quit, select BACK.
Navigating To Your Starting Point
You can navigate back to the starting point of your track or
activity along the path you traveled. This feature is available
only for activities that use GPS.
During an activity, select STOP > TracBack.
Your current location
appear on the map.
Altimeter and Barometer
The device contains an internal altimeter and barometer. The
device collects altimeter and barometer data continuously, even
in low-power mode. The altimeter displays your approximate
elevation based on pressure changes. The barometer displays
environmental pressure data based on the fixed elevation where
the altimeter was most recently calibrated
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the DOWN key to
access the MOB function quickly
1
Hold MENU.
2
Select Tools > MOB.
Geocaches
A geocache is like a hidden treasure. Geocaching is when you
hunt for hidden treasures using GPS coordinates posted online
by those hiding the geocache.
Downloading Geocaches
1
Connect the device to your computer using a USB cable.
4
Map)
, track to follow
, and end point
(Altimeter
Settings).
(Customizing the Hot
2
Go to www.garmin.com/geocaching.
3
If necessary, create an account.
4
Sign in.
5
Follow the on-screen instructions to find and download
geocaches to your device.
Navigating to a Geocache
Before you can navigate to a geocache, you must download a
geocache to your device. Go to
for more information.
Navigating to a geocache is like navigating to any other location
(Navigating to a
Logging the Attempt
After you have attempted to find a geocache, you can log your
results.
1
Hold MENU.
2
Select User Data > Geocache > Log Attempt.
3
Select Found, Did Not Find, or Unattempted.
4
Select an option:
• To begin navigation to a geocache nearest you, select
Find Next.
• To end the logging, select Done.
chirp™
A chirp is a small Garmin accessory that is programmed and left
in a geocache. You can use your device to find a chirp in a
geocache. For more information about the chirp, see the chirp
Owner's Manual at www.garmin.com.
Finding a Geocache with a chirp Device
1
Hold MENU.
2
Select Settings > Sensors > chirp.
3
Select START > Navigate > Geocache.
4
Wait while the device locates satellites.
5
Select a geocache, and select chirp to show chirp details
while you are navigating.
6
Select Go, and navigate to the geocache
Destination).
When you are within 10 m (33 ft.) of the geocache that
contains a chirp device, a message appears.
Your device can be used for a variety of outdoor, athletic, and
fitness activities. When you start an activity, the device displays
and records sensor data about your activity. You can save
activities and share them with the Garmin Connect™
community.
The device functions differently depending on your activity. For
example, data pages, recorded data, and menu options may
Key).
appear differently based on your activity.
Skiing
Going Downhill Skiing or Snowboarding
Before you go skiing or snowboarding, you should charge the
device completely
1
Select START > Ski-Board.
2
Wait while the device locates satellites.
3
Select START to start the timer.
History is recorded only while the timer is running.
4
Start your activity.
www.garmin.com/geocaching
Destination).
Activities
(Charging the
Device).
(Navigating to a
Geocaches