Garmin Fenix 5s 소유자 매뉴얼 - 페이지 27

{카테고리_이름} Garmin Fenix 5s에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fenix 5s 48 페이지.
Garmin Fenix 5s에 대해서도 마찬가지입니다: 소유자 매뉴얼 (27 페이지)

페이지 인쇄
Garmin Fenix 5s 소유자 매뉴얼
2
Select Clock > Alarm Clock > Add Alarm.
3
Select Time, and enter the alarm time.
4
Select Repeat, and select when the alarm should repeat
(optional).
5
Select Sounds, and select a type of notification (optional).
6
Select Backlight > On to turn on the backlight with the alarm.
7
Select Label, and select a description for the alarm
(optional).

Deleting an Alarm

1
From the watch face, hold UP.
2
Select Clock > Alarm Clock.
3
Select an alarm.
4
Select Delete.

Starting the Countdown Timer

1
From the watch face, hold UP.
2
Select Clock > Timer.
3
Enter the time.
4
If necessary, select Restart > On to automatically restart the
timer after it expires.
5
If necessary, select Sounds, and select a type of notification.
6
Select Start Timer.

Using the Stopwatch

1
From the watch face, hold UP.
2
Select Clock > Stopwatch.
3
Select
to start the timer.
4
Select BACK to restart the lap timer .
The total stopwatch time
5
Select
to stop both timers.
6
Select an option.

Adding Alternate Time Zones

You can display the current time of day in additional time zones
on the Alt. Time Zones widget. You can add up to four alternate
time zones.
NOTE: You may need to add the Alt. Time Zones widget to the
widget loop.
1
From the watch face, hold UP.
2
Select Clock > Alt. Time Zones > Add Zone.
3
Select a time zone.
4
If necessary, select Yes to rename the zone.

Setting Clock Alerts

1
From the watch face, hold UP.
2
Select Clock > Alerts.
3
Select an option:
• To set an alert to sound a specific number of minutes or
hours before the actual sunset occurs, select Til Sunset >
Status > On, select Time, and enter the time.

Navigation

continues running.
• To set an alert to sound a specific number of minutes or
hours before the actual sunrise occurs, select Til Sunrise
> Status > On, select Time, and enter the time.
• To set an alert to sound every hour, select Hourly > On.

Syncing the Time with GPS

Each time you turn on the device and acquire satellites, the
device automatically detects your time zones and the current
time of day. You can also manually sync the time with GPS
when you change time zones, and to update for daylight saving
time.
1
From the watch face, hold UP.
2
Select Clock > Sync With GPS.
3
Wait while the device locates satellites
Signals, page
34).
Navigation

Saving Your Location

You can save your current location to navigate back to it later.
1
Hold LIGHT.
2
Select .
3
Follow the on-screen instructions.

Editing Your Saved Locations

You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, select
Locations.
2
Select a saved location.
3
Select an option to edit the location.

Projecting a Waypoint

You can create a new location by projecting the distance and
bearing from your current location to a new location.
1
If necessary, select
project waypoint app to the apps list.
2
Select Yes to add the app to your list of favorites.
3
From the watch face, select
4
Select UP or DOWN to set the heading.
5
Select
.
6
Select DOWN to select a unit of measure.
7
Select UP to enter the distance.
8
Select
to save.
The projected waypoint is saved with a default name.

Navigating to a Destination

You can use your device to navigate to a destination or follow a
course.
1
From the watch face, select
2
Select a category.
3
Respond to the on-screen prompts to choose a destination.
4
Select Go To.
Navigation information appears.
5
Select
to begin navigation.

Navigating to a Point of Interest

If the map data installed on your device includes points of
interest, you can navigate to them.
1
From the watch face, select
(Acquiring Satellite
> Navigate > Saved
> Add > Project Wpt. to add the
> Project Wpt..
> Navigate.
.
21