Garmin Forerunner 35 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Garmin Forerunner 35에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Forerunner 35 16 페이지.
Garmin Forerunner 35에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지)

페이지 인쇄

Customizing the Backlight for Activities

You can customize the backlight behavior during timed

activities.

Select

> Settings > System > Backlight During

Activity.

Select an option:

• Select Auto to automatically turn on the backlight for

alerts, messages, and key presses.

NOTE: The backlight turns off automatically.

• Select Stays On to manually turn on and off the backlight.

ANT+ Sensors

Your device can be used with wireless ANT+ sensors. For more

information about compatibility and purchasing optional sensors,

go to http://buy.garmin.com.

Pairing ANT+ Sensors

Pairing is the connecting of ANT+ wireless sensors, for example,

connecting a heart rate monitor with your Garmin device. The

first time you connect an ANT+ sensor to your device, you must

pair the device and sensor. After the initial pairing, the device

automatically connects to the sensor when you start your activity

and the sensor is active and within range.

Select , and select an activity profile.

Install the sensor or put on the heart rate monitor.

Bring the device within 1 cm of the sensor, and wait while the

device connects to the sensor.

When the device detects the sensor, a message appears.

You can customize a data field to display sensor data.

If necessary, select

ANT+ sensors.

Foot Pod

Your device is compatible with the foot pod. You can use the

foot pod to record pace and distance instead of using GPS when

you are training indoors or when your GPS signal is weak. The

foot pod is on standby and ready to send data (like the heart

rate monitor).

After 30 minutes of inactivity, the foot pod powers off to

conserve the battery. When the battery is low, a message

appears on your device. Approximately five hours of battery life

remain.

Going for a Run Using a Foot Pod

Before you go for a run, you must pair the foot pod with your

Forerunner device

(Pairing ANT+ Sensors, page

You can run indoors using a foot pod to record pace, distance,

and cadence. You can also run outdoors using a foot pod to

record cadence data with your GPS pace and distance.

Install your foot pod according to the accessory instructions.

Select the Run Indoor activity profile.

Go for a run.

Foot Pod Calibration

The foot pod is self-calibrating. The accuracy of the speed and

distance data improves after a few outdoor runs using GPS.

> Settings > Sensors to manage

8).

Device Information

Specifications

Battery type

Rechargeable, built-in lithium-ion battery

Battery life

Up to 9 days for watch mode, includes smart

notifications, activity tracking, and wrist heart

rate

Up to 13 hr. for GPS training mode

Operating

From -20º to 50ºC (from -4º to 122ºF)

temperature range

Charging

From 0º to 45ºC (from 32º to 113ºF)

temperature range

Radio frequency/

2.4 GHz ANT+ wireless communications

protocol

Bluetooth Smart wireless technology

Water rating

Swim, 5 ATM*

*The device withstands pressure equivalent to a depth of 50 m.

For more information, go to www.garmin.com/waterrating.

Troubleshooting

Support and Updates

Garmin Express (www.garmin.com/express) provides easy

access to these services for Garmin devices.

• Product registration

• Product manuals

• Software updates

• Data uploads to Garmin Connect

Getting More Information

• Go to www.garmin.com/intosports.

• Go to www.garmin.com/learningcenter.

• Go to http://buy.garmin.com, or contact your Garmin dealer

for information about optional accessories and replacement

parts.

Resetting the Device

If the device stops responding, you may need to reset it.

NOTE: Resetting the device may erase your data or settings.

Hold

for 15 seconds.

The device turns off.

Hold

for one second to turn on the device.

Restoring All Default Settings

NOTE: This deletes all user-entered information and activity

history.

You can reset all settings back to the factory default values.

Select

> Settings > System > Restore Defaults > Yes.

Viewing Device Information

You can view the unit ID, software information, and regulatory

information.

Select

> Settings > System > About.

Select

Updating the Software

Before you can update your device software, you must have a

Garmin Connect account, and you must download the Garmin

Express application.

Connect the device to your computer using the USB cable.

When new software is available, the Garmin Express

application sends it to your device.

Follow the on-screen instructions.

ANT+ Sensors