Garmin FORETREX 601 BALLISTIC EDITION 소유자 매뉴얼 - 페이지 15
{카테고리_이름} Garmin FORETREX 601 BALLISTIC EDITION에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin FORETREX 601 BALLISTIC EDITION 30 페이지. Ballistic edition
Garmin FORETREX 601 BALLISTIC EDITION에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지)
페이지 인쇄
Calibrating the Barometric Altimeter
You can manually calibrate the barometric altimeter if you know the correct elevation or the correct barometric
pressure.
1 Go to a location where the elevation or barometric pressure is known.
2 From the menu page, select SETUP > ALTIMETER > CALIBRATE ALTIMETER.
3 Follow the on-screen instructions.
Trip Computer Options
From the trip computer page, select ENTER.
CHANGE FIELDS: Allows you to customize the data fields on the trip computer page
Fields,
page 10).
RESET TRIP DATA: Resets the trip and elevation data
Resetting the Trip Computer
For accurate information, you can reset the trip and elevation information before beginning a trip.
From the menu page, select SETUP > RESET > RESET TRIP DATA > YES.
Applied Ballistics Options
NOTE: This feature is available only on the Foretrex 701 device.
From the Applied Ballistics page, select ENTER.
QUICK EDIT: Allows you to quickly edit the range, direction of fire, and wind information
Shooting Conditions,
page 5).
RANGE CARD: Allows you to view elevation and windage for various ranges based on user input parameters.
You can change fields
Range Increment,
page 11), and set the base range
TARGET CARD: Allows you to view range, elevation, and windage for ten targets based on user input
parameters. You can edit the target name and values
ENVIRONMENT: Allows you to customize atmospheric conditions for your current environment. You can enter
custom values, use the pressure value from the internal sensor in the device, or use the temperature value
from a connected tempe sensor.
TARGET: Allows you to customize long-range shooting conditions for your current target. You can change the
selected target and customize conditions for up to ten targets
PROFILE: Allows you to customize gun properties
Bullet Properties,
page 12), and output units of measure for your current profile. You can change the
selected profile
(Selecting a Different Profile,
page 12).
CHANGE FIELDS: Allows you to customize the data fields on the Applied Ballistics page
Fields,
page 10).
SETUP: Allows you to select the input units of measure for the Applied Ballistics page.
Customizing the Range Card Fields
1 From the Applied Ballistics page, select ENTER > RANGE CARD > ENTER > CHANGE FIELDS.
2 Select
or
to scroll through the available fields.
3 Select ENTER to save your selection and move to the next field.
4 Select PAGE to save your changes.
Editing the Range Increment
1 From the Applied Ballistics page, select ENTER > RANGE CARD > ENTER > RANGE INCREMENT.
2 Follow the on-screen instructions.
Customizing Your Device
(Customizing the Range Card Fields,
page 12) and add additional profiles
(Resetting the Trip Computer,
page 11), edit the range increment
(Setting the Base Range,
(Editing the Target Card,
(Changing the Target,
(Editing Gun Properties,
page 13), bullet properties
(Customizing the Data
page 11).
(Quickly Editing
(Editing the
page 12).
page 12).
page 12).
(Editing
(Adding a Profile,
(Customizing the Data
11