Garmin MDFlight 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Garmin MDFlight에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin MDFlight 19 페이지.

Garmin MDFlight 빠른 시작 매뉴얼

4.15 Low-level alert for tank 1

Vibrates, beeps and displays in red fuel graphics for tank 1. (saved in
profile)

4.16 Low-level alert for tank 2

Vibrates, beeps and displays in red fuel graphics for tank 2. (saved in
profile)

4.17 Plane/Heli

Choose between plane or helicopter.
In helicopter mode, the speeds menu disappear as the landing/takeoff are
automatically calculated taking into account vertical speed and ground
speed. (saved in profile)

4.18 Speed unit

Select speed unit between km/h, knots or mph (saved in profile)

4.19 Speed trigger

Select speed to automatically start timer and activity.
This sets the block-off time that will be displayed in the log screen after
the flight and also in the activity. (saved in profile)

4.20 Takeoff trigger

Select speed to automatically detect takeoff
This sets the takeoff time that is captured for each lap in the activity.
The takeoff trigger must be greater than the landing trigger. Values below
the landing trigger will not be accepted while trying to enter them.

4.21 Landing trigger

Select speed to automatically detect landing. (saved in profile)
This sets the landing time that is captured for each lap in the activity.
The landing trigger must be lower than the landing trigger. Values above
the takeoff trigger will not be accepted while trying to enter them.