Garmin Vivofit 2 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Garmin Vivofit 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Vivofit 2 8 페이지. Garmin vivofit 2 bracelet pedometer
Garmin Vivofit 2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (3 페이지)
페이지 인쇄
Introduction
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
Before you can use the device, you must set up the device on
your computer or compatible mobile device.
1
Go to www.garminconnect.com/.
2
Select an option:
• If you are using a computer to set up your device, plug the
wireless USB ANT Stick
download and install the Garmin Express
(Downloading the
Software).
• If you are using a mobile device to set up your device,
install and open the Garmin Connect
(Downloading the Mobile
3
Select the device key
When you turn on the device for the first time, it is in pairing
mode. If your device is not in pairing mode when you turn it
on, you must hold the device key until PAIR appears.
NOTE: Until you pair your device and complete the setup
process, the device has limited functionality.
4
Follow the instructions on your computer or mobile device to
pair your device and complete the setup process.
Downloading the Software
1
From your computer, go to www.garminconnect.com/.
2
Select an option:
• If you are using a Windows
Download for Windows, and follow the on-screen
instructions.
• If you are using a Mac
Download for Mac, and follow the on-screen instructions.
Downloading the Mobile App
You can use the Garmin Connect Mobile app to pair your device
and complete the setup process. This allows you to share and
analyze data and download software updates from your mobile
device. Unlike other Bluetooth
Bluetooth settings on your mobile device, your device must be
paired directly through the Garmin Connect Mobile app.
NOTE: Your mobile device must support Bluetooth Smart in
order to pair with your device and synchronize data. See the
application store for your mobile device for compatibility
information.
1
From your mobile device, go to
2
Select Get the App, and follow the on-screen instructions.
Sending Data to Your Computer
Before you send data to your computer, you must plug the USB
ANT Stick into a computer USB port, and you must download
the Garmin Express setup software
1
Bring the device within 3 m (10 ft.) of your computer.
2
Hold the device key until SYNC appears.
Introduction
WARNING
into an empty USB port, and
™
™
setup software
™
Mobile app
App).
to turn on the device.
operating system, select
®
operating system, select
®
devices that are paired from the
®
www.garminconnect.com
(Downloading the
3
View your data at Garmin Connect.
Pairing Your Device with Multiple Computers
You can pair your device with multiple computers. For example,
you can pair your device with your home and work computers.
1
Plug the USB ANT Stick into a computer USB port.
2
Download the Garmin Express setup software for Windows
or Mac
(Downloading the
3
Hold the device key until PAIR appears.
4
Follow the instructions on your computer to pair your device
and complete the setup process.
5
If necessary, repeat steps 1-4 for each additional computer.
NOTE: You can pair only one computer at a time.
Sending Data to Your Mobile Device
Before you can send data to your mobile device, you must pair
the device with a compatible mobile device
Mobile
App).
Your device synchronizes with the Garmin Connect Mobile app
periodically. You can also send data to your mobile device at
any time.
1
Bring the device within 3 m (10 ft.) of your mobile device.
2
Hold the device key until SYNC appears.
3
View your data in the Garmin Connect Mobile app.
Pairing Multiple Mobile Devices
You can pair your device with multiple mobile devices. For
example, you can pair your device with a smartphone and a
tablet.
1
Install and open the Garmin Connect Mobile app on your
mobile device
2
Hold the device key until PAIR appears.
3
Follow the instructions on your mobile device to pair your
device and complete the setup process.
4
If necessary, repeat steps 1-3 for each additional mobile
device.
NOTE: You can pair only one mobile device at a time.
Wearing the Device
1
Select
.
2
Make sure the pegs on the clasp are fully inserted
.
When both pegs are fully inserted, the device fits securely
.
3
Turn the clasp to the locked position.
Red marks on the clasp indicate the unlocked position.
NOTE: To prevent loss, the clasp must be turned to the
locked position.
4
.
Icons
Icons appear at the bottom of the display. Each icon represents
a different feature. You can select the device key to cycle
through the different device features.
Software).
Software).
(Downloading the Mobile
fits best on you
(Downloading the
App).
1