Garmin 010-10370-00 - MapSource MetroGuide - v.5.00 사용자 설명서 - 페이지 16
{카테고리_이름} Garmin 010-10370-00 - MapSource MetroGuide - v.5.00에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin 010-10370-00 - MapSource MetroGuide - v.5.00 30 페이지. Software de mapeamento
Garmin 010-10370-00 - MapSource MetroGuide - v.5.00에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지), 소유자 매뉴얼 (2 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (28 페이지), (포르투갈어) 사용자 설명서 (30 페이지)
페이지 인쇄
u
M
s
>
t
sIng
ap
ource
ransferrIng
Transferring MapSource Data
You can send map sets, waypoints, routes, and tracks to
your GPS unit or storage card, or you can receive data
from your GPS unit or storage card. You may use one
of the following methods to transfer data to or from
your GPS unit (check your GPS unit owner's manual to
see what data transfer options are available):
• Serial or USB Cable
• USB Data Card Programmer or USB Data
Card Programmer RoHS (USB 2.0)—You can
use this method if your GPS unit uses a Garmin
data card (not preprogrammed). The USB Data
Card Programmer RoHS works with Windows
2000 or newer.
• Compact Flash (CF) or Secure Digital (SD)
Card Reader—If your GPS unit uses a CF, SD,
micro SD, or transflash card, you can purchase a
third-party card reader to transfer data. In some
instances, you cannot transfer waypoints, routes,
or tracks using a card reader.
M
s
d
ap
ource
ata
Each time you transfer maps to a data card, you
completely erase all data currently stored on the card
and replace it with new data. However, if you store
maps on a data card and you transfer waypoints, routes,
or tracks, you will not erase the maps on the card.
You can transfer waypoints, routes, and tracks from
a data card to your GPS unit's internal memory to
prevent them from being deleted from your data card.
You cannot save maps from a data card to your GPS
unit's internal memory.
NOTE: Not all units can accept waypoints,
routes, or tracks from a data card. Check your
GPS unit owner's manual to see if your unit is
compatible.
iQue
Users
®
To transfer data to and from an iQue, you may need to
synchronize with your personal computer. You may not
be able to send or receive all types of data to/from your
iQue. For more information, refer to your iQue owner's
manual.
MapSource User's Manual