Alivida Steam 12 설치 및 사용자 설명서 - 페이지 13
{카테고리_이름} Alivida Steam 12에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alivida Steam 12 18 페이지. Generator for steam bath/hammam
페이지 인쇄
Electric
ELECTRICAL INSTALLATION:
The generator may only be installed in a space intended for the generator. Do not
install the generator on the inside of the steam bath/Hammam. Connect the appliance
to the mains using an insulated multi-pole switch or multi-pole removable plug which is
included in the wiring.If a power cord is damaged, it should only be replaced by a
professional technician. Make sure that the electrical connection corresponds to the
specification on the steam generator.
Model
Power (Watts)
Alivida Steam 3
Alivida Steam 6
Alivida Steam 9
Alivida Steam 12
Pay attention! all cooking groups run in 5 core cable.
The steam generators are delivered in such a condition that they are suitable for single
phase electricity supply. If technical conditions permit, the steam generator can be
connected to a three-phase electricity supply by removing the jumper cables. Connect
electrical connections as shown in the drawing below:
The electrical connection may only be made by means of a cable of the type:
H05VV-F, with a suitable length and diameter.
Type
H05VV-F
Voltage (volts)
2800
230
5600
1 x 230 (cooking group)
8400
1 x 230 (cooking group) + 1 x 230
11200
2 x 230 (cooking group)
Standaard
60227 IEC53 HD22
13
A
1 x 16
2 x 16
2 x 16 + 1 x 16
2 x 16 + 2 x 16
Keurmerk
HAR