Aliyiqi ATL-3 사용자 설명서 - 페이지 5
{카테고리_이름} Aliyiqi ATL-3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aliyiqi ATL-3 6 페이지. Digital tension meter
페이지 인쇄：Press"SET"key enter into lower limit value setting，
3.2.2
（LODT）Lower limit value setting
Press" "and" "to adjust the number,choose the number you need,Press"SET"key to save
and enter into next function .As the picture shows:：
： you can choose minute from 1 to 100,you can
3.2.3
（OFFT） Automatically show down time setting
also choose "0000"for not shut down .Default shutdown time is ten minutes. Press "SET" key to
enter into setting shut down automatically .Press
" " "and" " to adjust number,and then press "SET" key to save.
Factory reset: In this menu, press "SET" key to recover to factory resetting ,the
3.2.4
、
（RESET）
instrument shut down.
3.3 Test
3.3.1 Turn on .
3.3.2 Choose the parameter you need.
3.3.3 Choose the unit you need.
3.3.4 To make test with hands or other equipment,when in use, only use the test rod toggle the
tested object, from the static state to the required position, the surface of the measured object and
5 / 6