Brother 884-B02 사용 설명서 - 페이지 10

{카테고리_이름} Brother 884-B02에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 884-B02 38 페이지. Compact overlock machine

Retracting knife

To sew without cutting the fabric edge, you need to

retract the knife as follows.

CAUTION

Do not touch the knife.

Move the knife lever only while the needle is at its

lowest point.

Be sure to unplug the power supply cord from the

wall outlet before retracting the knife.

1. Pull up the knife lever <A>, then pull it to the

right.

<A>

2. Bring down the knife.

3. Retract the knife completely, then take your

hand off from the lever.

The normal stitch length setting is 3 mm. To

change the stitch length, turn the stitch length

adjustment dial on the right side of the body.

<A>

1 Shorten the stitch length to a minimum of 2 mm

(5/64 inch).

2 Lengthen the stitch to a maximum of 4 mm (5/32

inch).

<A> Selection mark

The normal stitch width setting for regular overlock

stitch is 5mm (13/64 inch). To change the stitch

width, turn the stitch width adjustment dial.

<A>

1 Increase the width to a maximum of 7 mm (9/32

inch).

2 Reduce the stitch width to a minimum of 5 mm

(3/16 inch).

<A> Selection mark