Brother 884-B31 운영 매뉴얼 - 페이지 14

{카테고리_이름} Brother 884-B31에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 884-B31 36 페이지. Cover stitch machine / top cover stitch machine

페이지 인쇄

Needle

This machine uses a standard home sewing

machine needle.

The recommended needle is 130/705H (#90).

Needle description

1 Back (flat side)

2 Front

3 Groove

How to check the needle

4 Flat surface

5 Place the needle on its flat side and check to see if the space

is even.

NOTE:

Fabric damage can be reduced by using 130/705H

SUK (#90) BALL POINT.

Removing/Installing

the needle

<A> Removing/installing the left needle

<B> Removing/installing the center needle

<C> Removing/installing the right needle

1 Tighten

2 Loosen

To remove:

1. Turn off the main power and light switch.

2. Turn the handwheel so that the line on the

handwheel is aligned with the line on the

machine. (See "Turning direction of handwheel"

in CHAPTER 1.)

3. Loosen the corresponding needle set screw

by turning it with the included hexagonal driver

toward 2 in the illustration, and then remove

the needle.

To install:

1. Turn off the main power and light switch.

2. Turn the handwheel so that the line on the

handwheel is aligned with the line on the

machine.

3. Hold the needle with its flat side away from you

and insert it up as far as it will go.

4. Tighten the needle set screw securely by

turning it with turning the included hexagonal

driver toward 1 in the illustration.

NOTE:

Be sure to insert the needles all the way.

CAUTION

Always be sure to turn off the power before

removing/inserting the needle.

Do not drop the needle and needle set screw in

the machine, otherwise it may be damaged.