Brother 885-X01 운영 매뉴얼 - 페이지 10
{카테고리_이름} Brother 885-X01에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 885-X01 44 페이지.
Brother 885-X01에 대해서도 마찬가지입니다: 운영 매뉴얼 (44 페이지), 운영 매뉴얼 (44 페이지), 운영 매뉴얼 (44 페이지)
페이지 인쇄
KNOWING YOUR SEWING MACHINE — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Lower the presser foot lever and fix the
5
presser foot onto the shank. If the presser
foot is in the correct place, the bar should
snap in.
¢
1 Shank
2 Bar
THE CONTROLS
Pattern selection dial
CAUTION
When you use the pattern selection dial
●
to choose a pattern, raise the needle by
turning the handwheel toward you
(counterclockwise) so that the mark on
the wheel points up. If the needle is in
the down position when you turn the
pattern selection dial, the needle, presser
foot or fabric may be damaged.
To choose a stitch, simply turn the pattern selection dial
in either direction.
2
1
1 Pattern selection dial
2 Chosen pattern number
9
2
■ Presser foot installation orientation
CAUTION
If the presser foot is not installed with
●
the correct orientation, the needle may
strike the presser foot, which may bend
or break the needle and cause injury.
Patterns and stitch names
■ 17 Stitches
1
2
3
£ £
9
10
12
Preset Length
Pattern
Stitch Name
1
4-STEP AUTOMATIC
BUTTONHOLE
2
STRAIGHT STITCH
(Center Needle
Position)
3
STRAIGHT STITCH
(Center Needle
Position)
4
5
6
7
8
13
14
15
16
17
(mm (inch))
Reference
Page
Preset Width
(mm (inch))
0.5 (1/32)
30
5 (3/16)
1.6 (1/16)
26, 34
—
1.8 (1/16)
26,34
—