Brother 885-X13 운영 매뉴얼 - 페이지 25

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

When sewing thin fabrics, the stitching may become

misaligned or the fabric may not feed correctly. If this

occurs, place thin paper or stabilizer material under the

fabric and sew it together with the fabric. When you

have finished sewing, tear off any excess paper.

1 Stabilizer material or paper

First, baste the pieces of fabric together, and then sew

without stretching the fabric.

1 Basting

Stitching cylindrical

pieces

Removing the flat bed attachment makes it easier to sew

cylindrical pieces such as cuffs and pant legs, or hard-

to-reach areas.

Slide the flat bed attachment to the left to

1

release it.

1 Flat bed attachment

With the flat bed attachment removed,

free-arm sewing is possible.

1

1

1

Note

● When you are finished with free-arm

sewing, install the flat bed attachment back

in its original position.

Slide the part that you wish to sew onto

2

the arm, and then sew from the top.

Sewing with a twin needle

(Option)

We have designed your machine so you can sew with

this needle and two top threads. You can use the same

color or two different colors of thread for making

decorative stitches.

1 Twin needle

CAUTION

●

Use only twin needles that have been

made for this machine (part code:

X57521-021:2.0/75 with a 2 mm width).

Other needles could break and damage

the machine.

●

Make sure that the needle does not strike

the presser foot.

●

Do not sew with bent needles. The

needle could break and injure you.

■ Attaching the twin needle

Attach the twin needle in the same way as a single

needle (see page 7–8). The flat side of the needle

should face toward the back and the rounded side

should face toward you.

2 Extra spool pin

24

2