Brother 885-X21 운영 매뉴얼 - 페이지 27
{카테고리_이름} Brother 885-X21에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 885-X21 44 페이지.
Brother 885-X21에 대해서도 마찬가지입니다: 운영 매뉴얼 (44 페이지), 운영 매뉴얼 (44 페이지), 운영 매뉴얼 (44 페이지)
페이지 인쇄
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3
BUILT-IN STITCHES
Straight stitching
Straight stitches are used for sewing plain seams.
Stitch Name
Straight Stitch
(Center Needle Position)
Straight Stitch
(Center Needle Position)
Straight Stitch
(Center Needle Position)
Straight Stitch
(Center Needle Position)
Straight Stitch
(Center Needle Position)
Straight Stitch
(Left Needle Position)
■ Top stitching and stretch materials
You can use a straight stitch for top stitching and
sewing lightweight fabrics.
Zigzag stitching
Stitch Name
Zigzag Stitch
Zigzag Stitch
Zigzag Stitch
Zigzag (Satin)
Stitch
Stitch Length
Pattern
[mm (inch)]
2
1.6 (1/16)
3
1.8 (1/16)
4
2 (1/16)
5
2.5 (3/32)
6
4 (3/16)
7
2.5 (3/32)
Stitch
Stitch Width
Pattern
Length
[mm (inch)]
[mm (inch)]
8
0.7 (1/32)
1.5 (1/16)
9
1.5 (1/16)
10
2 (1/16)
5 (3/16)
11
0.5 (1/32)
5 (3/16)
■ Zigzag stitch
Turn the pattern selection dial to the Zigzag Stitch,
and then start sewing.
We recommend that you sew using the Straight
Stitch at the beginning and end of Zigzag Stitches.
(This acts as a reinforcement stitch.)
■ Zigzag (Satin) Stitch
You can use the Zigzag (Satin) Stitch for making
decorative stitches.
When sewing a Zigzag (Satin) Stitch, use a slightly
looser upper-thread tension to produce more
beautiful stitches.
With the pattern selection dial, the Zigzag (Satin)
Stitch (number 11) can be set to one of three stitch
lengths. The middle position is the setting for the
standard stitch length.
1 For a shorter stitch length, turn the pattern
selecting dial to the left position of Zigzag
(Satin) Stitch (number 11).
2 For a longer stitch length, turn the pattern
selecting dial to the right position of Zigzag
(Satin) Stitch (number 11).
3 (1/8)
1
2
3
26