Garmin Oregon 300 빠른 참조 매뉴얼 - 페이지 2
{카테고리_이름} Garmin Oregon 300에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Oregon 300 2 페이지. Oregon series
Garmin Oregon 300에 대해서도 마찬가지입니다: 소유자 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (8 페이지), 소유자 매뉴얼 (26 페이지), (덴마크어) 매뉴얼 (48 페이지)
페이지 인쇄
Installing the Batteries
See the Important Safety and Product Information guide in
the product box for product warnings and other important
information.
The Oregon operates on two AA batteries (not included). Use
alkaline, NiMH, or lithium batteries.
Use premium batteries for optimal performance and maximum
battery life. The best performance is provided by lithium batteries
and NiMH rechargeable batteries less than one year old with a
capacity greater than 2500 mAh.
To install the batteries:
Battery cover
1. Lift the latch and remove the
battery cover.
2. Insert the batteries,
observing polarity.
3. Replace the battery cover
and push the latch down.
NOTe: Remove the batteries when you do not plan to use the
Oregon for several months. Stored data is not lost when batteries
are removed.
To select the battery type:
1.
On the Main Menu, touch Setup > System > Battery
2.
Select Alkaline, Lithium, or NiMH.
Getting Started
To turn the Oregon on:
Press the Power key.
To turn the Oregon off, press and hold the
Power key.
To adjust the backlight level:
1. While the Oregon is on, press and quickly
release the Power key.
2. Touch
or
to adjust the brightness
levels.
Latch
To lock or unlock the screen:
1. Press and quickly release the Power key.
2.
Touch Lock Screen (or Unlock
Screen).
To acquire GPS satellite signals:
1. Go outdoors to an open area, away from tall buildings and
trees.
2. Turn the Oregon on. Acquiring satellite signals can take a few
minutes.
The
bars on the Main Menu indicate satellite strength.
When the bars are green, the Oregon has acquired satellite
Type.
signals.
Using the Map Page
To access the Map page, touch Map.
Your current location is indicated by
a location marker
.
To zoom in or out:
Touch
or
.
To pan across the map:
On the Map page, touch and drag
the screen.
Main Menu
To review detailed information about a point on the map:
1. Pan to the location you want to
review, if necessary, and then
touch it.
2. Touch the information button
at the top of the screen for
additional information.
To show or hide data fields:
1. On the Main Menu, touch
Setup > Map > Data Fields > Show Data
2.
Touch Never, When
Navigating, or Always.
To change the Map page data fields
1. On the Map page, touch one of the data fields.
2. Touch a data type.
Creating and Editing Waypoints
Zoom range
To mark your current location as a waypoint and edit the
waypoint:
1.
On the Main Menu, touch Mark
Zoom
2.
Touch Save and
Edit.
buttons
•
Touch the attribute you want to change.
Location
•
Touch letters, numbers, or symbols to
marker
make the changes.
•
Touch
(except when changing a
symbol). Change other attributes, if
necessary.
•
Touch
.
Information
button
To edit a waypoint:
1.
On the Main Menu, touch Waypoint
2. Touch the waypoint you want to edit.
To delete a waypoint:
1.
On the Main Menu, touch Waypoint
2. Touch the waypoint you want to delete.
Fields.
3.
Touch Delete
Waypoint.
To reposition a waypoint to your current location:
1.
On the Main Menu, touch Waypoint
2. Touch the waypoint you want to reposition.
3.
Touch Reposition
Here.
Waypoint.
Manager.
Manager.
Manager.