Brother 888-N02 운영 매뉴얼 - 페이지 13

{카테고리_이름} Brother 888-N02에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 888-N02 32 페이지.
Brother 888-N02에 대해서도 마찬가지입니다: 운영 매뉴얼 (32 페이지)

페이지 인쇄

Needle

CAUTION

• Use recommended home sewing machine

needles�

• Never use bent needles� Bent needles can

easily break, possibly resulting in injuries�

Checking the needle

Before using the needle, place the flat side of the

needle on a flat surface and check that the distance

between the needle and the flat surface is even�

Flat side

Even

Flat surface

Note

• The machine needles are consumables� Replace the

needle in cases such as those described below�

- If an unusual sound is produced when the needle

enters the fabric� (The tip of the needle may be

broken or dull�)

- If stitches are skipped� (The needle may be bent�)

- Generally, after completing one project, such as a

piece of clothing�

Replacing the needle

CAUTION

• Before replacing the needle, be sure to turn

off the machine, otherwise injuries may

occur if the foot controller (or

Stop" button) ★) is accidentally pressed and

the machine starts sewing�

Raise the needle to its highest position�

Turn toward you so that this mark

points up to the highest position�

Remove the presser foot� (page 14)

★

: Only for some models�

Needle type marking

Not even

("Start/

★

Press once or twice�

Turn off the machine�

Before replacing the needle, cover the hole in the

needle plate with fabric or paper to prevent the

needle from falling into the machine�

Remove the needle�

Screwdriver

Install another needle�

Insert until the needle touches this part�

Make the flat side

face back�

Attach the presser foot� (page 15)

CAUTION

• Be sure to install the needle as described

above, otherwise the needle may break or

damage may result�

Sewing with the twin needle

You can sew with the twin needle and

two upper threads� You can use the

same color or two different colors of

thread for making decorative stitches�

For details on the stitches that can be sewn with the

twin needle, refer to "Stitch chart"

(http://s�brother/cmkag/)�

* The twin needle and the extra spool pin are sold separately

with some models�

CAUTION

• Use the twin needle that has been made for

this machine (part code: X59296-121)�

• Do not sew with bent needles� The needle

could break and injure you�

• You cannot use the needle threader to thread

the twin needle� Instead, thread the twin

needle by hand, from front to back� Using the

needle threader may damage the machine�

* Do not apply strong

force�

Loosen�

Tighten�