Garmin VIEO RV 1052 소유자 매뉴얼 - 페이지 28

{카테고리_이름} Garmin VIEO RV 1052에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin VIEO RV 1052 38 페이지.

페이지 인쇄

Select an option:

• To set the IP address, select IP, and enter the IP address.

• To set the subnet mask, select MASK, and enter the

subnet mask.

NOTE: The subnet mask must match all other devices on

the network to work properly. A typical subnet mask is

255.255.255.0.

• To set the default gateway IP address, select GATEWAY,

and enter the gateway IP address.

NOTE: The default gateway is typically set as the IP

address of the DHCP server on the network.

Select Save.

Resetting Network Settings

You can reset all network settings for this stereo to the factory

default values.

Select

Additional Stereo Control Options

Fusion-Link Wireless Remote Control App

You can use the Fusion-Link remote control app on your

compatible Apple or Android device to adjust the stereo volume,

change the source, control playback, select and manage radio

presets, and adjust some stereo settings.

The app communicates with the stereo using a wireless

connection to the mobile device. You must connect your

compatible device to the stereo using Bluetooth or Wi‑Fi

technology to use the app.

For information about the Fusion-Link remote control app for

compatible Apple or Android devices, go to the Apple App

Store

or the Google Play

Resetting the Stereo Settings

You can reset all of the stereo features and settings to the

factory default settings.

Select

Vehicle Cameras

This device is intended to enhance the situational awareness

when used properly. If used improperly, you could become

distracted by the display, which could lead to an accident

causing serious personal injury or death. Only access the

information displayed on the device with a glance. Always

maintain awareness of your surroundings and do not stare at the

display or become distracted by the display. Focusing on the

display could cause you to miss obstacles or hazards. Use the

device at your own risk.

The stereo can show live video and audio from connected

vehicle cameras, such as backup cameras or side-mirror

cameras.

If your vehicle cameras and stereo were included with the new

vehicle, the cameras are already connected and configured by

the manufacturer.

If you are installing your own backup camera kit, you must

connect the camera video to a video input on the back of the

stereo, and the camera microphone to the Aux2 input (if

applicable). To show the camera automatically, you must

connect the camera to a camera trigger wire. For more

information about the stereo connections, see the Vieo Series

Installation Instructions.

> NETWORK > RESET > YES.

store.

™

> UPDATE > FACTORY RESET.

WARNING

Viewing a Vehicle Camera

Before you can view a vehicle camera, a compatible camera

must be connected to the stereo.

Before you can view cameras automatically, you must enable

camera auto-display options

page

22).

Select an option to view a vehicle camera:

• To automatically show the backup camera, place the

vehicle into reverse.

• To automatically show a side-mirror camera, activate the

vehicle turn signal.

NOTE: This option is typically available only as a

manufacturer option on select vehicles, and may not be

available on your vehicle.

• To manually show the backup camera, select

Camera.

The vehicle camera view appears on the screen.

If available, select

to mute or unmute audio from the

camera microphone.

TIP: If the vehicle camera microphone is connected and this

option is not available, verify the microphone is enabled

(Enabling the Vehicle Camera Microphone, page

Select an option to resume normal operation:

• Take the vehicle out of reverse.

• Deactivate the vehicle turn signal.

• Select

Enabling Camera Auto-Display

You can enable or disable auto-display features for compatible

vehicle cameras.

Select

> Camera > > Auto-Display.

Select a camera.

Flipping the Camera Image

In some installation situations or when performing reverse

maneuvers, you can reflect the camera image, similar to the

view in a rearview mirror.

Select

> Camera > > Mirror Video.

Select a camera.

Enabling the Vehicle Camera Microphone

Before you can enable the vehicle camera microphone, it must

be connected to the Aux2 input on the stereo.

If the connected vehicle camera includes a microphone, you can

enable or disable the microphone in the camera viewer.

Select

> Camera > > Mic Installed.

When the microphone is enabled,

screen.

Garmin is not responsible for the accuracy or timeliness of the

traffic information.

Your device can provide information about traffic on the road

ahead or on your route. You can set your device to avoid traffic

when calculating routes, and to find a new route to your

destination if a large traffic delay occurs on your active route

(Traffic Settings, page

25). The traffic map allows you to

browse the map for traffic delays in your area.

To provide traffic information, your device must be receiving

traffic data.

(Enabling Camera Auto-Display,

22).

appears on the camera

Traffic

NOTICE

Vehicle Cameras