Brother 888-X55 운영 매뉴얼 - 페이지 32

{카테고리_이름} Brother 888-X55에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 888-X55 40 페이지.
Brother 888-X55에 대해서도 마찬가지입니다: 운영 매뉴얼 (2 페이지), 운영 매뉴얼 (40 페이지)

페이지 인쇄
Brother 888-X55 운영 매뉴얼
USING ATTACHMENTS AND APPLICATIONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Darning

Stitch Name
Pattern
Straight Stitch
6
(Center Needle
Position)
Straight Stitch
7
(Center Needle
Position)
Straight Stitch
8
(Center Needle
Position)
Straight Stitch
9
(Center Needle
Position)
Straight Stitch
10
(Center Needle
Position)
Straight Stitch
11
(Left Needle
Position)
Turn off the machine.
1
Place the darning plate on the needle
plate, then turn on the machine.
Either remove both the presser foot and
2
presser foot holder assembly and then
lower the presser foot lever.
Put the section you want to darn under
3
the presser foot together with fabric for
reinforcement.
Turn on the machine.
4
CAUTION
●
Do not turn on the machine while pressing
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
31
Stitch
Length
Other
[mm (inch)]
Darning
1.6 (1/16)
Plate
Darning
1.8 (1/8)
Plate
Darning
2 (1/16)
Plate
Darning
3 (1/8)
Plate
Darning
4 (3/16)
Plate
Darning
2.5 (3/32)
Plate
Begin sewing by alternating between
5
gently drawing the work away from you
and pulling it toward you.
Note
● Sew while holding the fabric stretched in
order to keep the fabric held down.
Repeat this motion until the section being
6
darned is filled with parallel lines of
stitching.