Brother 888X87 Series 운영 매뉴얼 - 페이지 34

{카테고리_이름} Brother 888X87 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 888X87 Series 48 페이지.
Brother 888X87 Series에 대해서도 마찬가지입니다: 운영 매뉴얼 (2 페이지), 운영 매뉴얼 (47 페이지), 운영 매뉴얼 (2 페이지), 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (3 페이지)

페이지 인쇄
Brother 888X87 Series 운영 매뉴얼
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Mending
Place the reinforcement fabric under the
1
area you want to mend.
• Use the basting pins to hold the
reinforcement fabric.
Following the line of the tear, sew using
2
the Elastic Stitch as shown.
■ Sewing elastic
Pin the elastic tape to the wrong side of
1
the fabric.
As you sew, stretch the elastic in front of
2
and behind the presser foot.
■ Joining fabric
You can use the Elastic Stitch to join two pieces of
fabric together and it is very effective when sewing
knitted fabrics. If you are using nylon thread, the
stitch will not be visible.
Put the edge of the two pieces of fabric
1
together and center them under the
presser foot.
Sew them together using the Elastic Stitch.
2
Make sure you keep the two fabric edges
close together.
• Use the basting pins to hold the two fabric
edges close together.

Double action stitching

Stitch Name
Pattern
16
Double Action
Stitch
17
Bridging Stitch
* Stitch nos. 16-17 are only available on certain models.
These stitches are used for joining two pieces of fabric,
such as when making patchwork.
Example: Patchwork with Double Action Stitch
1
2
3
1 Desired seamline
2 Straight Stitch
3 Double Action Stitch
Stitch
Stitch Width
Length
[mm (inch)]
[mm (inch)]
1.2 (1/16)
5 (3/16)
1.2 (1/16)
5 (3/16)
32
3