Garmin G3000 사용 설명서 - 페이지 17
{카테고리_이름} Garmin G3000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin G3000 18 페이지. Swapping gsa80 roll & gsa80 yaw servo on citation cj3+
Section 5
Troubleshooting
This section will provide corrective actions for issues seen after the software is loaded.
• Fail Message During Software & Configuration Loading
o If a fail message occurs:
Acknowledge the pop-up window by pressing the Enter key.
Press the Enter key to uncheck the box where the FAIL occurred.
Select LOAD at the bottom of the display.
o After everything else is loaded successfully, reload the item that failed previously.
If that fails again, troubleshoot the issue.
Substitute LRU name for ***.
• *** DB Error or *** DB Mismatch
o Ensure that the supplemental SD cards are installed in the lower slots of the
displays.
o Databases do not match.
o Verify which database is not the same, and reload as necessary.
• *** Manifest Error
o Software does not match what the system is expecting.
o Check work performed and reload necessary software again.
• *** Config
o Configurations do not match what the system is expecting.
o Check work performed and reload necessary configurations again.
Version 1.0
REFERENCE ONLY
• Reloading the software and configuration for that component will
sometimes correct the issue.
REFERENCE ONLY
17