Garmin G500 매뉴얼 - 페이지 38
{카테고리_이름} Garmin G500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin G500 40 페이지. Primary flight and multifuction display system
Garmin G500에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지), 사용 설명서 (14 페이지)
4.6.7 Vertical Speed Bug Coupling
Certain autopilots may be coupled to the PFD vertical speed bug for maintaining
a selected vertical speed. Except as described in this section, refer to the
autopilot AFMS and/or Pilot's Guide for autopilot system operation.
4.6.7.1 S-Tec Autopilots
To select and maintain a vertical speed:
1.
Select the desired vertical speed with the PFD vertical speed bug.
2.
Press VS on the autopilot programmer computer to engage vertical
speed mode.
The selected vertical speed will automatically be reduced
towards zero when approaching the selected altitude bug.
AUTO will appear in the vertical speed PFD knob mode
indicator when vertical speed is being reduced automatically.
Manually changing the selected vertical speed while AUTO is
displayed will cancel automatic vertical speed reduction.
4.6.7.2 Bendix/King Autopilots
To select and maintain a vertical speed:
1.
Select the desired vertical speed with the PFD vertical speed bug.
2.
Press and hold the VS button on the PFD to engage or disengage
vertical speed mode.
When vertical speed mode is engaged, VS is displayed in
green text in the upper right corner of the PFD.
While VS mode is engaged, the vertical speed bug may be changed by:
Adjust the vertical speed bug with the PFD knob, or
Press and hold the vertical trim rocker switch on the autopilot in the
desired direction, or
Press the CWS button on the control wheel to synchronize the vertical
speed bug to the current vertical speed.
AFMS, GARMIN G500 PFD/MFD SYSTEM
FAA APPROVED
NOTE
NOTE
190-01102-01 Rev. 9
Page 38 of 40