Garmin GDL 69 활성화 지침 - 페이지 27
{카테고리_이름} Garmin GDL 69에 대한 활성화 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GDL 69 38 페이지. Xm satellite radio instructions for continued airworthiness
Garmin GDL 69에 대해서도 마찬가지입니다: 활성화 지침 (46 페이지), 파일럿 매뉴얼 부록 (50 페이지), 파일럿 매뉴얼 부록 (50 페이지), 활성화 지침 (16 페이지), 사용 설명서 (44 페이지), 사용 설명서 (8 페이지), 매뉴얼 (15 페이지)
페이지 인쇄
5.2.1 Verify Textual METAR
To select the METARs Text Page:
1. Turn the larger outer knob on the right and move through the Page Groups until the WPT Page
Group is selected.
2. Turn the small inner knob on the right to the Textual METAR page.
3. Press PUSH CRSR and turn small inner knob to enter airport ID.
4. Press ENT. The Textual METAR Page is displayed for the airport you selected similar to Figure 4-5,
available
if
. You can enter a different identifier by highlighting 'TEXTUAL METAR' and press
ENT. Turn the small right knob and scroll through the list of four letter identifiers.
5.3 Refreshing
If the unit is not activated after 1.5 hours a 'refresh' maybe needed. To accomplish this go to the website
www.xmradio.com/refresh as explained in Section 2.2. When asked for the Radio ID number on the
website, enter the ID number of the unit you are refreshing, either your audio package or your data
(weather) package. If refreshing both, you'll have the opportunity to 'refresh another XM radio'. If you
still are having trouble, call Garmin technical support using the telephone numbers listed on page iii.
5.4 Deactivating and Reactivating the GDL 69/69A
When the GDL 69/69A is not properly activated, in some cases it may be necessary to perform a full
deactivation and reactivation of the system in order to make it work properly. This procedure is
complicated and should never be attempted without the guidance of Garmin AT technical support
personnel. Please contact Garmin AT technical support using the telephone numbers listed on page iii.
XM Activation Procedures
190-00355-04
Figure 5-3. Textual METAR Page
Page 21
Rev. H