Garmin GEA 71 설치 매뉴얼 - 페이지 10
{카테고리_이름} Garmin GEA 71에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GEA 71 34 페이지.
페이지 인쇄
1.4
Technical Specifications
It is the responsibility of the installing agency to obtain the latest revision of the GEA 71 Environmental
Qualification Form. This form is available directly from Garmin under the following part number:
GEA 71 Environmental Qualification Form, Garmin part number 005-00147-02
To obtain a copy of this form, see the dealer/OEM portion of the Garmin web site (www.garmin.com).
1.4.1
Physical Characteristics
Characteristic
Width (w/ Rack)
Height (w/ Rack)
Depth (Rack w/ Connectors)
Unit Weight
Rack, Nutplate, & Connector Kit Weight
1.4.2
Power Requirements
Characteristic
Input Voltage
Unit Status
Max Current @ 28 Vdc
Off
On
On*
*Full Load On Transducer Power Outputs.
During the first five seconds of unit power-up, current is slightly higher due to backup
capacitors being charged. Estimate initial power-up current to be ~50 mA @ 28 Vdc
higher or ~100 mA @ 14 Vdc higher than the above figures.
1.5
Reference Documents
The following publications are sources of additional information for installing the GEA 71. Before
installing the GEA 71, the technician should read all referenced materials along with this manual.
Part Number
190-00303-00
190-00303-04
Page 1-2
Revision F
14/28 Vdc See the Environmental Qualification Form for
details on surge ratings and minimum/maximum operating
voltages.
0.01 A
0.15 A
0.50 A
NOTE
G1000 System Installation Manual
G1000 Line Maintenance and Configuration Manual
Specification
1.23 inches (3.12 cm)
6.30 inches (16.0 cm)
8.73 inches (22.17 cm)
1.75 lbs (0.79 kg)
0.83 lbs (0.38 kg)
Specification
Max Current @ 14 Vdc
(Optional)
0.01 A
0.30 A
1.00 A
Document
GEA 71 Installation Manual
190-00303-40