Garmin GFC 600 매뉴얼 - 페이지 33

{카테고리_이름} Garmin GFC 600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GFC 600 46 페이지. Installed in piper pa46-310p/350p

VOR

Navigation Source. ...........................................................................................SELECT CDI to VHF Nav

CDI .....................................................................................................................SET / VERIFY course

If HSI is installed:

Intercept Heading .....................................................ESTABLISH in HDG or ROL mode (if required)

If DG is installed (no HSI installed):

3. Final Approach Course ........................ALIGN aircraft on final approach course using HDG mode

3a. HDG Bug (on DG) ...........................................................................................SET course

GMC 605 APR Key ......................................................................................................................PRESS

Bold or subdued font VAPP annunciation ...............................................................VERIFY on GMC 605

Airspeed .........................................................................MAINTAIN 90 KIAS or greater (recommended)

7. Vertical Mode and Reference.................................................................... SELECT on GMC 605

If the Course Deviation Indicator (CDI) is greater than half scale deflection, the autopilot

will arm the VAPP mode. The pilot must ensure that the current heading will result in a

capture of the selected course. If the CDI is within half scale deflection, the autopilot will

enter the capture mode when the APR key is pressed.

In aircraft with a DG installed and no HSI, VAPP mode cannot be armed. HDG mode

must be used to align the aircraft on the approach course with less than half scale

deflection prior to pressing the APR key.

190-02011-11 Rev. 2

Tune and Identify a VOR station frequency

NOTE

GFC 600 Autopilot Installed in Piper PA-46-310P/350P

Page 33 of 46