Garmin GNC 250 파일럿용 빠른 참조 매뉴얼 - 페이지 22
{카테고리_이름} Garmin GNC 250에 대한 파일럿용 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNC 250 25 페이지. Garmin gnc 250: quick reference
Garmin GNC 250에 대해서도 마찬가지입니다: 설치 매뉴얼 (44 페이지), 유지보수 및 수리 매뉴얼 (20 페이지)
페이지 인쇄
CDI S
—
allows you to set the CDI scale to 0.3, 1.0 or 5.0 nm scale
ETTINGS
or an automatic scale. The default setting is 5.0 nm.
M
V
/A
A
—
allows you to select between true, auto or user-defined
AG
AR
RVL
LARM
magnetic variation options and set an arrival alarm for
waypoint arrival at a specified distance from a destination
waypoint. The default setting for magnetic variation is
'auto'.
N
A
S
—
allows you to define the runway length and surface type
EAREST
PT
EARCH
used in determining which nearest airports are displayed.
The default settings are '0 ft/mt' for length and 'any' for
runway surface.
B
S
—
allows you to specify a timeout interval for the GNC 250
ATTERY
AVER
display. The default setting is 30 seconds.
D
I
—
allows you to manually adjust the brightness of the dis-
ISPLAY
NTENSITY
play. The default setting is for automatic brightness.
T
T
—
provides a running clock on Nav Menu 2 that may be set
RIP
IMER
to run when power is on or when ground speed exceeds a
user-defined minimum.
U
M
—
allows you to select units of measure for various naviga-
NITS OF
EASURE
tion and planning displays.
S
U
A
—
allows you to turn specific controlled/restricted airspace
PECIAL
SE
IRSPACE
message alerts on or off. Turning message alerts off will
not prevent SUA information from being displayed on the
nearest SUA page.
M
D
—
allows you to select or define the map datum used. The
AP
ATUM
default datum is WGS
I/O C
2—
allows you to select input and output interface settings
HANNEL
and baud rate for channel 2. The default settings are 'off'.
'84.