Garmin GNC 420 빠른 참조 - 페이지 9
{카테고리_이름} Garmin GNC 420에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNC 420 23 페이지. 400/500 series gts 8xx interface
Garmin GNC 420에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (17 페이지), 파일럿 매뉴얼 부록 (22 페이지), 파일럿 운영 핸드북 (8 페이지)
페이지 인쇄
Selecting a nearby airport or a flight plan
waypoint as a direct-to destination:
1)
Press the Direct-to Key.
Turn the large right knob to highlight the
2)
nearest airport (NRST) or flight plan (FPL)
field.
3)
Turn the small right knob to display a window
listing nearby airports or all waypoints in the
active flight plan.
4)
Continue turning the small right knob to
scroll through the list and highlight the desired
airport.
Press the ENT Key to confirm the selected
5)
waypoint, and press the ENT Key again to
activate the direct-to function.
190-00140-21 Rev. F
Viewing airport information:
Turn the large right knob to select the WPT
1)
Page Group. 'WPT' appears in the lower right
corner of the screen.
2)
Turn the small right knob to select the desired
WPT page. Airport information is displayed on
the first six WPT pages: airport location, airport
runway, airport frequency, airport approach,
airport arrival, and airport departure.
Press the small right knob to activate the
3)
cursor.
4)
Use the small and large right knobs to enter
the identifier of the desired airport.
5)
Once the identifier is entered, the information
for that airport appears on the page. Press the
ENT Key to accept the selected identifier.
6)
To view the other airport information pages,
press the small right knob to remove the
flashing cursor and turn the small right knob
to select the desired page.
GNC 420/420A Quick Reference
VIEWING AIRPORT
INFORMATION
9