Garmin GNC 420A 파일럿 매뉴얼 부록 - 페이지 11
{카테고리_이름} Garmin GNC 420A에 대한 파일럿 매뉴얼 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNC 420A 22 페이지. 400/500 series gts 8xx interface
Garmin GNC 420A에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (23 페이지)
페이지 인쇄
1.6
USeR-INITIATeD TeST
In addition to the power-up test, the GTS 8XX performs self-tests during normal
operation. A self-test is performed once per minute to verify that the antenna is
connected. Also, a calibration is performed at varying intervals based on time and
temperature. A user-initiated test of the GTS 8XX interface can also be performed.
The test criteria are identical to the power up self-test, although the user-initiated test
is concluded by an aural pass/fail message.
NOTE: A user-initiated test can only be performed when in standby or failed
mode.
Performing a user-initiated test:
1)
Turn the small right knob to select the Traffic Page.
2)
From the Traffic Page, press the MENU Key to display the Page Menu.
3)
Turn the small right knob to select 'Self Test?'.
4)
Press the ENT Key, 'TEST' is displayed.
190-00140-78 Rev. A
Figure 2 Standby Mode
Figure 3 Self-Test Mode
400/500 Pilot's Guide Addendum for GTS 8XX Interface
GTS 8XX Interface
Test-Mode
Indication
5