Garmin GNS 430 파일럿 매뉴얼 부록 - 페이지 22

{카테고리_이름} Garmin GNS 430에 대한 파일럿 매뉴얼 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNS 430 27 페이지. Friendlypanels gps for microsoft fs9 & fsx
Garmin GNS 430에 대해서도 마찬가지입니다: 파일럿 매뉴얼 (22 페이지), 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (23 페이지), 파일럿 매뉴얼 부록 (22 페이지), 사양 (2 페이지), 파일럿 운영 핸드북 (10 페이지), 빠른 참조 (17 페이지), 운영 매뉴얼 (27 페이지)

Section 4

Ryan TCAD Interface

When the target pointer is placed on trafﬁ c, the

trafﬁ c range, squawk code (if available), and tail

number (if available) are displayed.

Monitoring Trafﬁ c

Refer to the information in the TCAD Pilot' s Guide regarding monitoring trafﬁ c on the display and the

corresponding actions to take.

Highlighting Trafﬁ c Data Using Map Panning

Panning is another map page function, which allows you to move the map beyond its current limits

without adjusting the map scale. When you select the panning function—by pressing the small right

knob—a target pointer flashes on the map display. A window also appears at the top of the map display

showing the latitude/longitude position of the pointer, plus the bearing and distance to the pointer from

your present position.

To use the map panning feature:

1. Press the small right knob to activate the panning target pointer.

2. Turn the small right knob to move up (turn clockwise), or down (turn counterclockwise).

3. Turn the large right knob to move right (turn clockwise), or left (turn counterclockwise)

4. To cancel map panning and return to your present position, press the small right knob.

When the target pointer is placed on trafﬁ c, the trafﬁ c range, altitude separation, squawk code (if

available), and tail number (if available) are displayed. The trafﬁ c is identiﬁ ed as follows:

TA: Traffic Advisory. This is traffic within 500 ft. of altitude separation that is

converging or maintaining altitude separation.

PA: Proximity Advisory. This is traffic within 500 ft. of separation and it is not a TA.

TRFC: other traffic.