Garmin GNS 430 운영 매뉴얼 - 페이지 24

{카테고리_이름} Garmin GNS 430에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNS 430 27 페이지. Friendlypanels gps for microsoft fs9 & fsx
Garmin GNS 430에 대해서도 마찬가지입니다: 파일럿 매뉴얼 (22 페이지), 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (23 페이지), 파일럿 매뉴얼 부록 (22 페이지), 사양 (2 페이지), 파일럿 운영 핸드북 (10 페이지), 빠른 참조 (17 페이지)

3.5 DIRECT-TO NAVIGATION

The GNS 430's direct-to function provides a quick method of setting a course to a

destination waypoint. Once a direct-to is activated, the GNS 430 establishes a point-to-

point course line (great circle) from the present position to the selected direct-to

destination. Navigation data on the various NAV pages provides steering guidance until

the direct-to is cancelled or replaced by a new destination.

To select a direct-to destination:

1. Press the Direct-to Key. The Select Direct-to Waypoint Page appears with the

waypoint identifier field highlighted.

2. Use the small and large right knobs to enter the identifier of the desired

destination waypoint.

3. Press the ENT Key to confirm the selected waypoint, and press the ENT Key

again to activate the direct-to function.

Shortcuts

Shortcuts are available when using the Direct-to Key, allowing the pilot to bypass the

use of the small and large right knobs to enter the destination waypoint's identifier. A

direct-to can be performed from any page displaying a single waypoint identifier (such

as the WPT pages for airports and NAVAIDS by simply pressing the Direct-to Key and

the ENT Key. For pages that display a list of waypoints (e.g., the Nearest Airport Page),

the desired waypoint must be highlighted with the cursor before pressing the Direct-to

Key.