Garmin GPS 400 파일럿 매뉴얼 부록 - 페이지 7

{카테고리_이름} Garmin GPS 400에 대한 파일럿 매뉴얼 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPS 400 27 페이지. 400/500 series gts 8xx interface
Garmin GPS 400에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (17 페이지), 빠른 참조 (23 페이지), 파일럿 매뉴얼 부록 (22 페이지)

페이지 인쇄
Garmin GPS 400 파일럿 매뉴얼 부록
GOODRICH STORMSCOPE INTERFACE
Goodrich STORMSCOPE Description
Refer to the WX-500 Pilot's Guide for a detailed description of the WX-500 STORMSCOPE.
The Goodrich STORMSCOPE WX-500 Series II Weather Mapping Sensor is a passive weather avoid-
ance system that detects electrical discharges associated with thunderstorms within a 200-nm radius of
the aircraft. The STORMSCOPE measures relative bearing and distance of thunderstorm-related electrical
activity and reports the information to the display. Interfaces are currently only available for the
WX-500 Series II STORMSCOPE System.

Power-Up Self-Test

The power-up self-test ensures that the WX-500 functions are operating properly. An error message is
displayed on the Message Page if data is no longer being received.
User-Initiated Test
In addition to the power-up test, the WX-500 performs a continuous self-test. This continuous
self-test is performed several times per minute. A user-initiated test can also be performed. The WX-500
Pilot' s Guide lists all of the possible faults, probable causes, and recommended actions if system failures are
noted.
To perform a user-initiated test:
1. From the default Nav Page, turn the small right knob to select the Weather Page.
2. Press MENU to display the Page Menu.
3. Turn the small right knob to select 'Self-Test?' and press ENT.
SECTION 2
Section 2
Goodrich STORMSCOPE Interface
The 400/500 Series units perform a self-test during
power-up to ensure proper operation of the
applicable interface components.
In addition to the power-up test, the user can
perform a self-test that is executed through the
400/500 Series unit display.
5