Garmin GPSMAP 400 series 파일럿 매뉴얼 - 페이지 26

{카테고리_이름} Garmin GPSMAP 400 series에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 400 series 28 페이지. Non-waas; display interfaces
Garmin GPSMAP 400 series에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 빠른 참조 매뉴얼 (2 페이지), 참조 매뉴얼 (2 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (30 페이지), 템플릿 매뉴얼 (2 페이지), 템플릿 (1 페이지), 구성 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지)

SECTION 4

RYAN TCAD INTERFACE

Air Shield

Refer to the TCAD Pilot' s Handbook for a detailed

description of the Air Shield.

Trafﬁc Warning Window

When the unit is not on the trafﬁc page and a trafﬁc

threat is imminent, the Trafﬁc Warning Window (Figure

4-7) is displayed. The Warning Window shows a small

thumbnail map and can display the Trafﬁc Page (press the

ENT Key) or return to the previous page (press the CLR

Key).

NOTE: The Trafﬁc Warning Window is disabled

when the aircraft ground speed is less than 30

knots or when an approach is active.

Figure 4-7 Trafﬁc Warning Window

4-6

Refer to the TCAD Pilot' s Handbook for a detailed

description of the Air Shield.

Voice and tones are used to alert the pilot. The alert

descriptions used by TCAD are listed in the TCAD Pilot' s

Handbook. Voice is used only during the highest level

of alerting; otherwise, tone is used. The voice alerting

can be turned on or off from the TCAD Setup Page or

from the conﬁguration pages. See the Garmin 400/500

Series Installation Manual available at authorized Garmin

Service Centers (only for the 9900 model).

If the unit fails to detect the TCAD or if the TCAD data

that is received is invalid, the trafﬁc screen shows "DATA

FAIL".

Refer to the TCAD Pilot' s Handbook for limitations of

the TCAD system.

400/500 Series Display Interfaces

190-00140-10 Rev. E